Opinions please!!!
13-05-2005, 06:05 PM
#1
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: Hants
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
Opinions please!!!
Im haveing a new engine fitted to my cossie.
So what do people think my bhp and torque figure will be when set up??
SPEC OF ENGINE AS FOLLOWS;
200 block +0.5mm bore
mahle pistons with big valve cut outs, 7.6-1 CR
knife edged, lightened and balanced crank
cometic multilayer head gasket
BD14 inlet and exhaust cams
vernier pulleys
stg 3 T34 hydrid turbo with 0.63 housing set for 2wd
2wd exhaust manifold conversion
4xgrey injectors
Group A spec k+n filter
mongoose stainless exhaust with debaffled rear box and 4in tail
racetec rs500 intercooler
racetec alloy rad
Group A spec 8.5mm plug leads
Group A coil
breather system and catch tank breather
set up and live mapped to 30psi
john
So what do people think my bhp and torque figure will be when set up??
SPEC OF ENGINE AS FOLLOWS;
200 block +0.5mm bore
mahle pistons with big valve cut outs, 7.6-1 CR
knife edged, lightened and balanced crank
cometic multilayer head gasket
BD14 inlet and exhaust cams
vernier pulleys
stg 3 T34 hydrid turbo with 0.63 housing set for 2wd
2wd exhaust manifold conversion
4xgrey injectors
Group A spec k+n filter
mongoose stainless exhaust with debaffled rear box and 4in tail
racetec rs500 intercooler
racetec alloy rad
Group A spec 8.5mm plug leads
Group A coil
breather system and catch tank breather
set up and live mapped to 30psi
john
Thread
Thread Starter
Forum
Replies
Last Post
kyle_st200
Ford Focus Diesel
5
21-08-2015 09:28 PM