General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

focus st3

Thread Tools
 
Search this Thread
 
Old 29-01-2019, 08:53 PM
  #1  
Ford2.5st
Virgin
Thread Starter
 
Ford2.5st's Avatar
 
Join Date: Jan 2019
Location: Bishops stortford
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Angry focus st3

Hoping someone can help currently have a focus st3 on the odd occasion while driving it has a hesitation for couple of seconds has a flat spot but if u keep your foot down it clears and pulls fine. Also when it does this the boost gauge drops and once it’s had its moment gauge comes back to normal when I first got the car it done it but recently getting more frequent. It’s almost like a misfire like it drops a cylinder. It’s had new plugs someone scanned it and came up with mass air flow sensor which was changed but still doing it. I’m hoping someone can point me in the direction of what it can be as at the moment spending money on it I haven’t got.. many thanks in advance..
Old 29-01-2019, 09:39 PM
  #2  
Lee read
Rs turbo
 
Lee read's Avatar
 
Join Date: Dec 2018
Location: Kidderminster
Posts: 306
Received 23 Likes on 22 Posts
Default

Hi mate could be a number of things. As you counted out two things. Look to see if there is a vacuum leak. Could be TPS maybe coil. Also a bit more in-depth could be that the injectors are clogging up so not giving a fine mist as it should.
Old 29-01-2019, 09:43 PM
  #3  
Ford2.5st
Virgin
Thread Starter
 
Ford2.5st's Avatar
 
Join Date: Jan 2019
Location: Bishops stortford
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Lee read
Hi mate could be a number of things. As you counted out two things. Look to see if there is a vacuum leak. Could be TPS maybe coil. Also a bit more in-depth could be that the injectors are clogging up so not giving a fine mist as it should.
it was ran on live data injectors were checked and all came back OK it put on dyno last week and was recently remaped and seems to be doing it more frequent since remap ?
Old 29-01-2019, 09:45 PM
  #4  
Ford2.5st
Virgin
Thread Starter
 
Ford2.5st's Avatar
 
Join Date: Jan 2019
Location: Bishops stortford
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Maybe possbile n75 someone elsee was saying also someone mentioned boost pressure sensor ? Very hard to determine weather it's engine side of it or turbo boost side ?
Old 30-01-2019, 05:59 AM
  #5  
Lee read
Rs turbo
 
Lee read's Avatar
 
Join Date: Dec 2018
Location: Kidderminster
Posts: 306
Received 23 Likes on 22 Posts
Default

I'd definitely be looking at all vacuum hoses mate and then many think about TPS I'd look at other sensors. Turbo side I'd probably only look at the actuator
Old 30-01-2019, 08:00 AM
  #6  
ajamesc
cossie fan (unluckerly)
 
ajamesc's Avatar
 
Join Date: Nov 2009
Location: hampshire
Posts: 9,795
Received 435 Likes on 393 Posts
Default

I had this like a low down miss as it was building boost or held at a low boost level. If you held it flat out it would clear. I fitted new plugs and a boost solenoid and it’s fine now. Mine had no warning lights or stored errors so was a case of trying bits lol

Last edited by ajamesc; 30-01-2019 at 08:58 AM.
Old 30-01-2019, 08:55 AM
  #7  
Gazzonator
Gary Krishna
iTrader: (9)
 
Gazzonator's Avatar
 
Join Date: Mar 2008
Location: Rickmansworth, Hertfordshire.
Posts: 4,029
Received 66 Likes on 54 Posts
Default

I did reply saying try plugs first then reread it and saw you'd changed them!

I would say it's likely to be an ignition coil tbh.

Last edited by Gazzonator; 30-01-2019 at 08:58 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pugo
Ford Mondeo Including ST
15
03-12-2006 10:25 PM
Rippers
General Car Related Discussion.
6
18-07-2006 05:56 PM
Dave Parker
Ford Mondeo Including ST
1
16-05-2006 04:02 PM
#13
General Car Related Discussion.
46
03-04-2006 11:14 PM



Quick Reply: focus st3



All times are GMT. The time now is 04:11 AM.