mot emissions test question
#5
I've found that life I needed.. It's HERE!!
iTrader: (3)
depends on how tuned it is imo
my car is only 450bhp and my emissions are 6.5 /7.5, (goes up and down)
but i guess its not set up correctly
i hate mot time,
you guys over there are lucky yous can go to private garages
can you really get emissions low enough on say a 550-600bhp cossie running big injectors/cams etc etc??
my car is only 450bhp and my emissions are 6.5 /7.5, (goes up and down)
but i guess its not set up correctly
i hate mot time,
you guys over there are lucky yous can go to private garages
can you really get emissions low enough on say a 550-600bhp cossie running big injectors/cams etc etc??
#7
PassionFords Creator
iTrader: (12)
Any YB can go through an emissions test without problems if mapped properly. Sometimes they have to be done live due to cam timing and random inlet depressions because of head port sizes but can always be brought down to legal levels. Later cars however will need the closed loop and catalyst fitted to be fully legal of course.
Last edited by Stu @ M Developments; 18-06-2014 at 06:49 AM.
Trending Topics
#8
depends on how tuned it is imo
my car is only 450bhp and my emissions are 6.5 /7.5, (goes up and down)
but i guess its not set up correctly
i hate mot time,
you guys over there are lucky yous can go to private garages
can you really get emissions low enough on say a 550-600bhp cossie running big injectors/cams etc etc??
my car is only 450bhp and my emissions are 6.5 /7.5, (goes up and down)
but i guess its not set up correctly
i hate mot time,
you guys over there are lucky yous can go to private garages
can you really get emissions low enough on say a 550-600bhp cossie running big injectors/cams etc etc??
In that respect, our test is a piece of piss. If the car cant pass the basic emissions, something is badly wrong.
It's the only one area of our MOT that is more lax than the rest of the UK....if we ignore the private testers overlooking things.
#11
10K+ Poster!!
iTrader: (4)
my 720 hp rb26 with 1000cc injectors only ran 3.1% at idle and it didnt have closed loop working just live mapped and a ported head with bigish cams.
Thread
Thread Starter
Forum
Replies
Last Post