Fitting avo coilovers with eccentric top mounts
17-12-2013, 10:18 PM
#1
Advanced PassionFord User
Thread Starter
iTrader: (6)
Join Date: Jun 2003
Location: Cork ,Ireland.
Posts: 2,183
Likes: 0
Received 0 Likes
on
0 Posts
Fitting avo coilovers with eccentric top mounts
Have just fitted Avo coilovers to project trackshed and also got eccentric top mounts,bar getting an eng shop to make up sleeves ,is their anyone supplying proper sleeves .
Must be a market as plenty of cars knocking around with this setup , Avo rod is @12mm and top mount hole is @20mm ????
mark maybe ??
Must be a market as plenty of cars knocking around with this setup , Avo rod is @12mm and top mount hole is @20mm ????
mark maybe ??
17-12-2013, 11:12 PM
#5
Advanced PassionFord User
Thread Starter
iTrader: (6)
Join Date: Jun 2003
Location: Cork ,Ireland.
Posts: 2,183
Likes: 0
Received 0 Likes
on
0 Posts
Ya, that's what mike suggested but I thought if they were on a shelf it would be easier than removing coilover and bringing to eng shop to measure make
Trending Topics
18-12-2013, 05:52 PM
#9
I've found that life I needed.. It's HERE!!
iTrader: (6)
Join Date: Nov 2008
Location: Sussex
Posts: 1,341
Likes: 0
Received 0 Likes
on
0 Posts
i make no promises that these will do the job but your welcome to them if you cover the pnp ,the top nuts are both slightly different an M10 but could be retapped ..
19-12-2013, 03:21 PM
#14
I've found that life I needed.. It's HERE!!
iTrader: (6)
Join Date: Nov 2008
Location: Sussex
Posts: 1,341
Likes: 0
Received 0 Likes
on
0 Posts
Its a std stick , I just bolted a 1" square to it so I could reach it , I had a T5 in my Race car for one meeting and the Getrag position was closer to the driver so I spaced the T5 stick back by a bit .
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
matman
Ford Rs Parts For Sale (Not cosworth, or Cvh Turbo)
1
09-09-2015 05:45 PM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM