waynefrst235

Hi folks, got a couple questions I hope someone can help with.

Dropped a knackered engine off to be stripped and rebuilt last week and got the dreaded phonecall today saying the crank cannot be saved

I think I have sourced a crank and everything else is ok apart from the rod on cylinder 4.

Looks like I will have to buy a complete set so what would people recommend??

It won't be chasing big power, stage 3 on a t34 is as far as it will be going.

As said everything else is fine....pistons, bores, head etc, just need some advice on rods to go with the crank.

Thanks in advance

LHD220Turbo

iTrader: (4)

standard rods are great in a yb, they are good for circa 600hp so no need to change.

gingerturbo

iTrader: (2)

If you want to get uprated then PEC but i would stick with standard

waynefrst235

Cheers, standard it is then.

Any idea where stocks them? Can find one set on ebay and that's it

LHD220Turbo

iTrader: (4)

try burton power maybe

waynefrst235

Burton only list Farndon rods for them nowadays

markk

iTrader: (2)

I have several rods I will sell singularly if required.

I also have a reground crank too

waynefrst235

Pm'd markk

rsmark86

iTrader: (3)

second hand bud, just get everything checked and balanced beforehand

waynefrst235

Yep I don't mind using used parts as long as they are good. The engine is all stripped and will be rebuilt by a pro so no worries there