RONNIE AMIS

iTrader: (17)

Does anybody know whether a saph front screen would fit a 3 door?

Cossie Sean

no mate, im sure they dont

RONNIE AMIS

iTrader: (17)

Bugger

LHD220Turbo

iTrader: (4)

speak to martin at reyland, he's got a heated screen in his 500, had a screen made i believe

dojj

iTrader: (3)

If you can find a mk1 screen that's heated then it will fit

From memory though the frames were thicker on the earlier cars but I'm not sure if that equated to smaller glass or not

LHD220Turbo

iTrader: (4)

https://passionford.com/forum/genera...21-result.html

Craig J

iTrader: (1)

Try Ricky Evans Motorsport. I have one of his heated screens in my 3dr racecar.

broadmoor

I run a heated sapp screen Ron.....you just gotta trim a small piece out of the bottom of the A post/Scuttle...

RONNIE AMIS

iTrader: (17)

Broadmoor that's perfect thanks mate. Is it a grinder job?

Hope you're well?

broadmoor

Yes fella....only needs a small amount of work ...and only wire up the drivers side to save weight on the cable

foci

Still in love with your car mate. Every time I see your sig. Mmmmmm

broadmoor

Thanks fella....gotta fall back in love with it myself or it will be broken up as its sitting doing nothing..

J1mbo

iTrader: (1)

Love the three door! Colour and wheels just look hard as nails

Sonic Boom

iTrader: (11)

Ronnie you can buy a proper 3 Door fitment heated screen for £210 plus the VAT

http://www.heatedwindscreen.com/acat...ndscreens.html

I was looking into this myself.

Rich

Glenn_

iTrader: (1)

Cool link matey i could do with a new screen in mine.If i crack my windscreen can i get it replaced with the insurance cover i have cause i know windscreens are covered in my insurance policy.

jason_nike

I got mine done on insurance.
Autoglass had to order it but didnt wait long

boy-racer-1

got mine off there a few weeks ago, only had 2 left when i ordered and they have to be imported which takes some time, also if your getting someone to fit yours ronnie your better off taking the old one out yourself and checking for rust first as any windscreen fitter will just put sealant over rust and not tell you and all that will cause is water leaks, its not that difficult taking the old one out if your using a long stanley blade and some oil but make sure you take the inside trim off first around the headlining it just pulls off

Glenn_

iTrader: (1)

Did you just phone up and tell them it was chipped or cracked.

jason_nike

Phoned up and said it was cracked (which it was)
No problems at all