rev counter issue
02-08-2012, 01:21 PM
#1
1.8 zetec ka in the makin
Thread Starter
Join Date: Feb 2012
Location: west mids
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
rev counter issue
ive installed a rev counter into the ka and connected it up to the 1.8 16v xr3i lump , but when ever the engine is running it goes hay wire .
ive got it wired from both end cables of the coil and there connected to the correct diodes and to the signal wire so i no the wiring is correct.
my query is , i just remembered that the rev counter was a classic mini specific after market unit and ive read some where that it will not work correctly with other types of coil is this true??
if so shall i just bin it ang get a normal aftermarket rev counter??
ive seen on some websites selling after market rev counters that they are not compatable with classic minis . . .
any one shed any light on this??
ive got it wired from both end cables of the coil and there connected to the correct diodes and to the signal wire so i no the wiring is correct.
my query is , i just remembered that the rev counter was a classic mini specific after market unit and ive read some where that it will not work correctly with other types of coil is this true??
if so shall i just bin it ang get a normal aftermarket rev counter??
ive seen on some websites selling after market rev counters that they are not compatable with classic minis . . .
any one shed any light on this??
Thread
Thread Starter
Forum
Replies
Last Post
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM
wheelwizardrefurbs
Technical help Q & A
5
22-09-2015 05:45 PM