best place to have a custom exhaust made heathrow area
#4
I cant comment on the quality of these guys work. But Ive bought some Magnaflow stuff off them before. And they're at Heathrow
http://www.profusioncustoms.com/pc/contact_us.php
Goodfabs isnt too far away. Although you'd probably need to book well in advance and I'm sure they'll be more expensive than your average fabricator.
http://www.goodfabs.com/
Or also near Heathrow and top quality
http://www.simpsonraceexhausts.com/page11.html
http://www.profusioncustoms.com/pc/contact_us.php
Goodfabs isnt too far away. Although you'd probably need to book well in advance and I'm sure they'll be more expensive than your average fabricator.
http://www.goodfabs.com/
Or also near Heathrow and top quality
http://www.simpsonraceexhausts.com/page11.html
#6
Sponsor
iTrader: (4)
http://www.simpsonraceexhausts.com/page11.html
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
Trending Topics
#8
Moderator
iTrader: (11)
http://www.simpsonraceexhausts.com/page11.html
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
Im with Jay on this as there rep is top drawer or if you want average then go to powerflow, once done get it along to the middlesex meets
#9
#10
PassionFord Regular
Thread Starter
Join Date: Jun 2010
Location: middlesex
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
#12
I've found that life I needed.. It's HERE!!
iTrader: (2)
christullettexhausts is 3 units down from me and we are in Aylesbury 30 min from heathrow he does ducati bike team and every type of race car you can think off I see them turn up in f1 style race trucks every day!!! He recently done a system for rob's focus rs From scc pm him on here for a recommendation but honestly I see there work everyday and I've not seen any better!!!
#13
PassionFord Regular
Thread Starter
Join Date: Jun 2010
Location: middlesex
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
re
christullettexhausts is 3 units down from me and we are in Aylesbury 30 min from heathrow he does ducati bike team and every type of race car you can think off I see them turn up in f1 style race trucks every day!!! He recently done a system for rob's focus rs From scc pm him on here for a recommendation but honestly I see there work everyday and I've not seen any better!!!
#15
Advanced PassionFord User
iTrader: (1)
Join Date: Dec 2004
Location: Bristol
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
http://www.simpsonraceexhausts.com/page11.html
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
#17
Professional Waffler
#18
Professional Waffler
iTrader: (6)
http://www.simpsonraceexhausts.com/page11.html
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
these are the best in the uk all the staff are ex f1 and all the machinery is top grade
#19
PassionFord Post Troll
iTrader: (3)
christullettexhausts is 3 units down from me and we are in Aylesbury 30 min from heathrow he does ducati bike team and every type of race car you can think off I see them turn up in f1 style race trucks every day!!! He recently done a system for rob's focus rs From scc pm him on here for a recommendation but honestly I see there work everyday and I've not seen any better!!!
#21
PassionFord Regular
Thread Starter
Join Date: Jun 2010
Location: middlesex
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
#22
Without knowing exactly what the £2k entailed it's hard to say whether it's good or bad.
But if it's just a exhaust system made from stainless it does sound a bit steep even for a bespoke item. A cossie underside wouldnt be the most difficult of cars
But if it's just a exhaust system made from stainless it does sound a bit steep even for a bespoke item. A cossie underside wouldnt be the most difficult of cars
Last edited by stevieturbo; 31-03-2012 at 08:52 PM.
#24
Ive had a full centre section made for my car by OJZ Engineering. It too is a work of art, although due to packaging I supplied my own silencers as it was just easier, quicker and more cost effective, as I was only able to leave the car for just over a day.
Either way, given the fabrication that was carried out on mine and cost, £2k for a Cossie system still sounds like a lot.
OJZ also made my exhaust manifolds and there's a hell of a lot more work in that again due to packaging and the fact there is two of them. Even they cost nowhere near £2k
In fact now that I think about it....the manifolds and centre section to the rear axle both cost less than £2k.
#25
Sponsor
iTrader: (4)
I dont doubt it.
Ive had a full centre section made for my car by OJZ Engineering. It too is a work of art, although due to packaging I supplied my own silencers as it was just easier, quicker and more cost effective, as I was only able to leave the car for just over a day.
Either way, given the fabrication that was carried out on mine and cost, £2k for a Cossie system still sounds like a lot.
OJZ also made my exhaust manifolds and there's a hell of a lot more work in that again due to packaging and the fact there is two of them. Even they cost nowhere near £2k
In fact now that I think about it....the manifolds and centre section to the rear axle both cost less than £2k.
Ive had a full centre section made for my car by OJZ Engineering. It too is a work of art, although due to packaging I supplied my own silencers as it was just easier, quicker and more cost effective, as I was only able to leave the car for just over a day.
Either way, given the fabrication that was carried out on mine and cost, £2k for a Cossie system still sounds like a lot.
OJZ also made my exhaust manifolds and there's a hell of a lot more work in that again due to packaging and the fact there is two of them. Even they cost nowhere near £2k
In fact now that I think about it....the manifolds and centre section to the rear axle both cost less than £2k.
gods knows steve but they go into harmonics and pressure ect before the build them its a proper thought out system then they turn up al the flanges and build it on the car
Thread
Thread Starter
Forum
Replies
Last Post
STeve
Official Passionford Show Attendances
23
12-09-2015 12:56 PM
borboyous
Cars for Sale
6
22-08-2015 11:17 AM