Soz for postin in the wrong forum but im re-fitting my turbo and want to know what the rule is for the actuator???

Is it wind in = More boost

Wind out =Less????

Thanx

 

You shorten it for more boost

 

Good stuff, ill go fit it now

 

I would have to say you would be best putting it on loose and get it set up by someone in the know...you could end up blowing your engine if you do it wrong and just take a guess at it..

 

Tis ok mate its only for a Diesel, it was running 20 psi bit i wanted less, so would it out for a lil less boost

 

Dont understand what you mean wind the actuator out unless you mean you have a bleed valve fitted in which case you wind it in for less boost
the actuator arm needs to be made longer but you will need to unhook the arm from the wastgate to do this, otherwise you will damage the actuator.