rsturbo27

as above wont to seel bare metal then use a protective coat cheers

charlie luciano

iTrader: (3)

Waxoil on mine

Luciano

-beefy-

iTrader: (6)

are you fussed on the colour , ?


my project has two liberal coats of upol red oxide , fillowed by a coat of upol primer , sprayable ( or brushable ) sealer then primer coat again , followed by colour coats x 2-3 and lacquer ,



doubt thats going to rust lol

wattie

Where you get that beefy? Off the Internet or a local supplier , asking caus our local places don't stock shit !

rsturbo27

looking to do in black or white not fussed sum people are saying wax oil sum are saying stillz i wont sumthing thats will reflects stone's so nothing chips nice fat coat

rsturbo27

wotys the diff between upol red oxide and normal red oxide or is it the same shit i,v got a full tin of red oxide would that do the prime bit o,k

liammcl

iTrader: (4)

This is a bit long winded but is my preferred method

- bare metal
- 2k etch primer
- brush on seam sealer on joins etc
- 2k high build primer
- Gravitex Stoneguard
- 2k polyurethane gloss / or base and clear

JamesH

iTrader: (21)

Mastic 121 or stonechip

-beefy-

iTrader: (6)

wattie , i get it cheap from a local auto jumble ,



pukka gear - be lost without it !!

opposite lock

iTrader: (3)

Try here
http://www.bilthamber.com/

botters

iTrader: (2)

this is the best method yet