pug 306 brake pedal sensor help?
Thread Starter
Too many posts.. I need a life!!
Joined: Jan 2011
Posts: 514
Likes: 0
From: wiltshire
pug 306 brake pedal sensor help?
as per title its a pug 306 1.9tdi t reg
the brake light sensor switch. what is the best way to fit new one will i have to take the brake pedal off.
thanks pete
the brake light sensor switch. what is the best way to fit new one will i have to take the brake pedal off.
thanks pete
Wahay!! I've lost my Virginity!!
Joined: Dec 2008
Posts: 94
Likes: 0
From: devon
When you say brake pedal sensor, do you mean the switch that is at the top end of the pedal that operates the brake lights??
If so it is easy to change just done mine, took about 5 mins. Just put the seat right back get in the floor and look up at the top of the brake pedal, the is a plug to take off and the switch is held in place by a clip take it out put the new one in and put the electrical plug back on. Job done.
Iirc the new switch was about 15 quid from the dealer and it was a dealer only part.
dave
If so it is easy to change just done mine, took about 5 mins. Just put the seat right back get in the floor and look up at the top of the brake pedal, the is a plug to take off and the switch is held in place by a clip take it out put the new one in and put the electrical plug back on. Job done.
Iirc the new switch was about 15 quid from the dealer and it was a dealer only part.
dave
Thread Starter
Too many posts.. I need a life!!
Joined: Jan 2011
Posts: 514
Likes: 0
From: wiltshire
When you say brake pedal sensor, do you mean the switch that is at the top end of the pedal that operates the brake lights??
If so it is easy to change just done mine, took about 5 mins. Just put the seat right back get in the floor and look up at the top of the brake pedal, the is a plug to take off and the switch is held in place by a clip take it out put the new one in and put the electrical plug back on. Job done.
Iirc the new switch was about 15 quid from the dealer and it was a dealer only part.
dave
If so it is easy to change just done mine, took about 5 mins. Just put the seat right back get in the floor and look up at the top of the brake pedal, the is a plug to take off and the switch is held in place by a clip take it out put the new one in and put the electrical plug back on. Job done.
Iirc the new switch was about 15 quid from the dealer and it was a dealer only part.
dave
i will try fitting it to moz. but i not got the smallist of hands/arms.
its all about the 5 pot
Joined: Dec 2008
Posts: 597
Likes: 0
From: Birmingham
Good luck. We found you had to drop the colum and get a small hand inside the pedal housing. Its a very fiddley job. We did a phase 2 S reg meridian. Dont remove the colum just drop it down.
Thread
Thread Starter
Forum
Replies
Last Post
massivewangers
General Car Related Discussion.
30
Oct 1, 2015 07:40 PM
The Enigma
Ford Sierra/Sapphire/RS500 Cosworth
2
Sep 12, 2015 10:12 PM
