gonna have to chamge the cambelt on the 3 door soon...

anyone know the part numbers for the Gates belts?

I can get gates belts here in Aus but I dont reckon theyre gonna list the cossie in their book!

also is there a beefier 'group A' belt? I seem to remember it was from a Land Rover or similar

cheers

 

Piper Cams do a wider belt for around thirty quid, I think it is about 6mm wider than standard

 

5248XS is the std Gates belt

 

cheers Steve,

Ill try the local motor factor this week and see if they can get that number belt.

I assume the belts are all the same for 3dr/2wd/4x4? Just its got a 200 block thats all.

anyone know the number for the 'group A' belt?

 

GRP A belt is a myth.

Gates one is what they sell as a grp a belt.

Bout 25 quid from motorfactors.

 

i just payed 40 quid for mine from the local factors - that included my 25% dscount

 

ok, that clears that up then

thanks dingly

 

My last one was 25.49 i think...

 

That must have been after your 100% price increase

 

coont - they aint the cheepest factors in town, but they were the only ones open at the time

 

i couldn't get one less than £35 in any factors round me..