ford focus carbon door cards
#5
Regular Contributor
I wish I would have bought a set as well, I was still undecided three weeks ago when they were still on. If anybody knows of a place please post it here.
This is the only one I found but they don't have a template for the focus:
www.streamlinecarbon.com
This is the only one I found but they don't have a template for the focus:
www.streamlinecarbon.com
Last edited by thielt1; 03-10-2011 at 04:44 PM.
#7
10K+ Poster!!
iTrader: (9)
there is no recommended thickness mate, just make sure you use enough rivets or rivnuts to hold the card secure to stop it from rattling/vibrating etc it's only there to cover a hole after all,
As for where to get them it depends on whether you want flat panels as per these like i had on my xr2 which cost about Ł20 for a carbon look
Cut them myself and used riv nuts to hold in place, cheap and looks good (once tape removed lol)
Or a proper moulded motorsport door panel as per the ones in my new fiesta
This style can be bought from various rally car specialist firms in carbon and grp etc, try the likes of MDV, m-sport etc as focus items were obviously made for the wrc cars so people have the moulds
Thanks
Marc
As for where to get them it depends on whether you want flat panels as per these like i had on my xr2 which cost about Ł20 for a carbon look
Cut them myself and used riv nuts to hold in place, cheap and looks good (once tape removed lol)
Or a proper moulded motorsport door panel as per the ones in my new fiesta
This style can be bought from various rally car specialist firms in carbon and grp etc, try the likes of MDV, m-sport etc as focus items were obviously made for the wrc cars so people have the moulds
Thanks
Marc
Last edited by M K; 03-10-2011 at 07:10 PM.
Trending Topics
#9
Too many posts.. I need a life!!
#10
BANNED
BANNED
Hello Gaz,
if you can send me a template I can have some sent back to you within 2 weeks with a discount for providing a template. Thickness would be under .7mm with a high gloss lacquered finish ensuring no yellowing in the future due to uv.
if you can send me a template I can have some sent back to you within 2 weeks with a discount for providing a template. Thickness would be under .7mm with a high gloss lacquered finish ensuring no yellowing in the future due to uv.
Thread
Thread Starter
Forum
Replies
Last Post