Best heat paint for Ex manifold
#5
#6
Someone once told me that when you use VHT (very high temp paint) heat the item that you are painting as you go along apparently when you do this it does not burn off when at running temp
I've not tried it though but always remember the tip
Luciano
I've not tried it though but always remember the tip
Luciano
Trending Topics
#8
Thread Starter
PassionFord Post Whore!!
iTrader: (23)
Joined: Dec 2004
Posts: 9,665
Likes: 16
From: The North
any good for you
http://www.frost.co.uk/item_Detail.a...tName=Manifold Grey (473ml)
http://www.frost.co.uk/item_Detail.a...tName=Manifold Grey (473ml)
#9
My mate swears by this on his race bike manifolds/exhausts, not tried it on a turbo car manifold though.
http://cgi.ebay.co.uk/PJ1-MOTORCYCLE...item359f946af0
http://cgi.ebay.co.uk/PJ1-MOTORCYCLE...item359f946af0
#11
Thread Starter
PassionFord Post Whore!!
iTrader: (23)
Joined: Dec 2004
Posts: 9,665
Likes: 16
From: The North
My mate swears by this on his race bike manifolds/exhausts, not tried it on a turbo car manifold though.
http://cgi.ebay.co.uk/PJ1-MOTORCYCLE-PAINT-FLAT-BLACK-EXHAUST-HIGH-TEMP-/230310570736?pt=UK_Motorcycle_Parts&hash=item359f9 46af0
http://cgi.ebay.co.uk/PJ1-MOTORCYCLE-PAINT-FLAT-BLACK-EXHAUST-HIGH-TEMP-/230310570736?pt=UK_Motorcycle_Parts&hash=item359f9 46af0
Jeff that looks clean but not keen on the finish colour
#13
I used VHT on a stainless manifold on my 200sx, regularly was glowing orange (daily basis) and it was minted, still black after 6 months use.
tried it on my RST, it's still black but it's only been heated a few times
put it on an XR4x4 turbo's manifolds and it's started to come off as manifolds rusting, car sits around often though.
all 3 times i've heated the manifolds with a heat gun, it's always kinda powdery.
tried it on my RST, it's still black but it's only been heated a few times
put it on an XR4x4 turbo's manifolds and it's started to come off as manifolds rusting, car sits around often though.
all 3 times i've heated the manifolds with a heat gun, it's always kinda powdery.
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford Focus RS Parts for Sale.
5
09-03-2016 01:03 PM
Focosmitch
Ford RS Cosworth Parts for Sale
5
03-11-2015 04:08 PM