Ginge !

ok but then i never knre ya liked that colour

jumpin jack crash

im just at ease with my sexuality mate

Ginge !

i agree mate, pride and all that

jumpin jack crash

thank foook im not a x-country rider!!!

Ginge !

you prefer to watch it im guessing, all that lycra and shaved legs im guessing

Charlie Chalk

iTrader: (1)

jumpin jack crash, i might be building up my Orange mis-isle soon


fancy a hard tail bike for home useage

jumpin jack crash

fuckin hell radders how long that took u to build!!!

nah my kona's doing great mate. until i get my pornking

why dont u start riding again, not like ur gonna get ur turbo off the runway

Ginge !

will that take as long as ya cars taking


oh and radders ya going on wednesday aint ya, iff soo ya can have a butchers at em car then , may have to "wipe" a few bits to see the paint in places

jumpin jack crash

Charlie Chalk

iTrader: (1)

b19bal, yes im going, i gotta pick up a cossi TB of switch



jumpin jack crash, i havent started yet i might do i said, then again i might sell it

jumpin jack crash

Charlie Chalk

iTrader: (1)

how much should i sell it for, it will have a custom blue paint job too

Ginge !

radders fancy doing a custom paitn job on my kona frame

jumpin jack crash

prob only get a ton maybe

Charlie Chalk

iTrader: (1)

will do me

Brycey

DH poofs!

Trials is where its at! Hardcore bikers us trials riders.



Pashley 26mhz Trials frame.

Ashton Fatty R Forks

XTR Front V Brake

Magura HS33 Rear Brake.

Chris King Hubs

Mavic 521 Ceramic Rear Rim

Mavic 517 Front Rim

Atomic DH Bars

Then all the little details,but the best part of Ł2000

Ginge !

do ya find the frame flexes out with that ????

i gotta have a hs33 but im going disk on front but the frames always flex out , cannondal was the worst though

jumpin jack crash

use to love those 10 tooth chain rings u boys rode around with

a few of my mates i rode with used to do it, very technical but not a lot else

Brycey

Does a bit but im using the 4bar mounts. Might go Hope Mini on the front.

Oh and the obligatory tarred up rims D

jumpin jack crash

u want some old skool hope DH4's

they are the daddys!!!

Ginge !

i fooking hate hope brakes , really do fooking hate em, the levers are totally shit and wear far too quickly causeing too much play on the lever blade , the original minis had a shit design where the bleed nipple was and the small allen key bolts on the top caps always fooking round off

of for magura discs as ya not gonna boil the fluid doing trials , they have a much more posative eeling lever too , or a hs33 on the front ( notice im a big magura fan

jumpin jack crash

hope discs are the best on the market by a mile.

even their 2 pot versions are better than most other companys 4 or 6 pot brakes

i agree maguras are better for trials because of the ability to feather them but u cant knock a hope brake

Ginge !

ok the brass bush wears the alloy lever due to it being a harder material, causing the levers play , i dont think they work as well as the magura discs EXCEPT when they get hot as mineral fluid dont seem to get along with higher temps ( D/H aint as good idea till they sort that ) the idea of spacers to "fit" the bikes frame is a bodge end of storey !!!!!

oh and the self centerign calipers are always readjusting and then ya gotta swop the spacers eyt again

apart from that there fine

the best feeling lever blade on the market for braking ( not i never said actually sue though) is the shimano 525 levers, im trying to fit 525 levers to a set of the new hope trials calipers when they finish off the rear and see how they work for a customer

even hope admit the bushes to wear the levers and said due to my slating em they "may" look into it

ive got one of there old Ti cassete hub and i used to have the old hope Ti dye spokes on my bike, in do rate the hopes stuff but i dont think there actually that good at there brakes , but alot of companies aint that good at em either, im also confused why all the mountian biek mags always give em 10/10 when they aint perfect

jumpin jack crash

ive had my DH4 for around 3- 4 years ive not had to change any parts exept the pads.

and ive only had to bleed them 6 times maybe in that time. the new mineral one ive never used. but they have got rather good brakes all round i think

its probably the only part of my bike i have never had to replace

It's Czech Mate

Theres a reason all my mates call them Crack'n'fail

Ginge !

no the nick name was from back in 93 actually, they madea 2.8 series frame m600 ( the one i just got rid of actually ) the frame weighed in a 2.8 pounds and most of em in the states broke, they done a big recall but never bother over here as not as many people at that time used em "off road"

mine never snapped though BUT just cause i never used my off road as the frame flex was sooooo fucking bad i couldnt get the rear brakes to work well enough to do fook all but slow me down, i fitted a carbo magura brake booster and a fooking heavy fred salmon brake booster ( they was the stiffest at the time but the cheepest and most heavy) and then the actual frame stay pushed out insead

hence why in never botherd with em off road

It's Czech Mate

Bout the same summer we all got bought delta v's and snapped three of 'em between us Any light bike with thinwall butted oversized tubing that has the welds filed and polished without being re-heat treated afterwards is asking for trouble.....and the warranty department got it.

Ginge !

yeah notice they dont got a lifetime garrantee anymore , my 93 frame still has it

Neil S

iTrader: (1)

Hope brakes are great!

I have a Mono 6 Ti, Mono M4, Mono Mini and an old Enduro 4 on my bikes, and rate them very highly indeed

Never had a problem with the levers tbh, tho I agree that the old pro levers were a little shonky

Neil.

Ginge !

the newer levers are fooking manky, trust me as the 2 partimers at work have em and they are pants, ive have to file and fit washers to sort the problem out for em

hence why i phoned hope to complain

Brycey

Too heavy

Chris King Hubs are the daddies!

Brycey

Alot of my mates run Hope Mini on the front,but not the Hope lever. They run a Carbon Fibre lever and have had no problems with them.

Pashley frames come with lifetime guarentee Well mine does,and ive only broke 2 But were replaced instantly

One was ripping the rear brake boss off when i dropped off a school roof onto a picnic bench. Bout a 12ft drop.

Othertime was a 18ft drop onto a railing that i misjudged and shattered the BB shell

Ginge !

bet ya never mentioned that when ya done the warantee

what carbon levers btw as im deffo looking in to em , just i feel that hope dont machine the stuff to the price of the stuff they charge

but they do work beter when hot, just the levers i fooking hate the most, fitting issues are a problem for me as i fit em and bleed em but when there on there fine, just they dam levers

jumpin jack crash

thats the stupid things about these bikes

the warranty doesnt cover the riding the bikes are built for

Brycey

b19bal - I did actually, they were suprised/impressed. Frame was courier collected and they sent me a new one.

Another frame company with a good returns is Planet-X.

Ill see if i cant find out which CF levers they use.

Ginge !

cheers mate

Monte 76

thats nothing i spent 30 mins showing a guy in work and explaining the roberts brazing frame finish and why its sooooo smooth

kelin are fooking nice bikes, the 94, is that the pink/yellow fade frame [/quote]
No I've got the Horizon linear fade which is Pink to purple to blue..... just mesmerising!
The colour you mentioned was Backfire which first appeared on the mighty Adroit which boasted Boron fibre reinforcements!

If you guys want some old skool bike porn then check out www.wundel.com

Steven_RW

i got a trek. 5600 i think




ride it 2 - 3 times a week.

Love it.

more of a roadie, just love the pain of peddling and pedalling and more pedalling... im prety sh4t on a mtb tbh

RW