Flamer kit fitting.....idiots guide please.. :cry:
28-01-2005, 04:08 PM
#1
PassionFord Post Whore!!
Thread Starter
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
Flamer kit fitting.....idiots guide please.. :cry:
can somone give me an idiots guide to fitting one, might have a go at it MYSELF
tonight.already got spark plug in exhaust and ht lead, cant remember if the coil is in there. I have got a switch mounted too.
28-01-2005, 04:16 PM
#4
PassionFord Post Whore!!
Thread Starter
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
I dont care 
my car flames anyway without it, just want to shit people up who tailgate me and impress the 14 year old girls down town 
so 
now tell me how to fit it
my car flames anyway without it, just want to shit people up who tailgate me and impress the 14 year old girls down town so now tell me how to fit it
28-01-2005, 04:45 PM
#5
PassionFord Post Whore!!
Thread Starter
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
up
or someone could scan their instructions. just need to know which colour wires go where...
and anything else I need to know to fit it
or someone could scan their instructions. just need to know which colour wires go where...
and anything else I need to know to fit it
28-01-2005, 04:46 PM
#6
DEYTUKURJERBS
i got mine off the cossie in the shed somwhere, ghey or not it looks better than black unburnt fuel smoke, you know its soo going on the GTR when its done, AND the 5Turbo if i find one
and doms reasoning for it is sound IMO, esp the 2nd one
with regards to fitting it, umm, cant remember, White is deffo power, brown is earth, and the other one goes to the coil i think.
then on the coil you just ground the negative.
job done.
possibly, been about 2yrs since even looked at mine
and doms reasoning for it is sound IMO, esp the 2nd one
with regards to fitting it, umm, cant remember, White is deffo power, brown is earth, and the other one goes to the coil i think.
then on the coil you just ground the negative.
job done.
possibly, been about 2yrs since even looked at mine
Trending Topics
28-01-2005, 04:55 PM
#9
PassionFord Post Whore!!
Thread Starter
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
cheers mate. I dont mind admitting I am fuckin useless at this sort of thing
will have a look later, otherwise, get someone to do it for me tomorrow
28-01-2005, 05:04 PM
#10
DEYTUKURJERBS
Just whatever you do, use PROPER wire for the power one (the white wire)
I didnt have any left so as we wanted to quickly try it out i used some that was almost but not quite as thick as the ones with the kit, and it caught fire in a petrol station
luckily my car was stripped out so no carpet to burn n put iself out in like 2secs, but caused a lot of smoke
I didnt have any left so as we wanted to quickly try it out i used some that was almost but not quite as thick as the ones with the kit, and it caught fire in a petrol station
luckily my car was stripped out so no carpet to burn n put iself out in like 2secs, but caused a lot of smoke
28-01-2005, 05:13 PM
#11
PassionFord Post Whore!!
Thread Starter
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
least you were in the right place, put some petrol on it, thats wet, that should put it out wonder if they cover flamer kits as cause of fire on my insurance policy
28-01-2005, 06:19 PM
#16
20K+ Super Poster.
Join Date: May 2003
Posts: 23,377
Likes: 0
Received 0 Likes
on
0 Posts
Dom,
Depends on what 4 colour wires you have, but I presume it's one of Mike's.
In which case, you run yellow to the negative of the coil, blue to the positive of the coil.
Brown is earth, and black (or pos blue) goes to ignition live.
The rest should be self explanatory.
Depends on what 4 colour wires you have, but I presume it's one of Mike's.
In which case, you run yellow to the negative of the coil, blue to the positive of the coil.
Brown is earth, and black (or pos blue) goes to ignition live.
The rest should be self explanatory.
28-01-2005, 06:24 PM
#19
PassionFord Post Whore!!
Thread Starter
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
fpmsl.
now RIch has said that I reckon I could handle that, need to ask someone to show me where this "ignition live" things is
and the "self explanitory" parts too
28-01-2005, 07:07 PM
#24
DEYTUKURJERBS
No, the ported shroud inlet on the turbo does that job
Itl have ALS too, but i know from experience that ALS or no, you will chuck out unburnt fuel smoke sometimes (i was nearly blinded by ians car once when he had the ALS on and it threw out a HUGE black ploom of smoke), and id rather that be a flame thanks
Itl have ALS too, but i know from experience that ALS or no, you will chuck out unburnt fuel smoke sometimes (i was nearly blinded by ians car once when he had the ALS on and it threw out a HUGE black ploom of smoke), and id rather that be a flame thanks
28-01-2005, 07:13 PM
#25
PassionFord Post Whore!!
Thread Starter
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
just got home, the control box has 2 black wires!! one brown and one blue. this is getting complicated
28-01-2005, 07:54 PM
#33
just finding my feet
domt do what a customer at work done, he fitted the spark plug in the zorst, then a coil and then wired that coil up to is engines coil, when he flikked the switch the car never flamed at all but actually missfired
wish i could say i was lying , was soooooo funny
wish i could say i was lying
, was soooooo funny
Thread
Thread Starter
Forum
Replies
Last Post