paul16v

Does anybody on here know anything about BMW marine engines?

The engine is a 6 cyl petrol inboard B190/220 and im trying to find a front pulley for it, been searching the net for the last hour with no luck, just wondered if anybody on here can help or point me in the direction of anywhere I can find one?

Trist

Can you get a serial number?

paul16v

The only markings on it that I can make out are a BMW symbol and the number 1263879

tabetha

You'll most likely find a std road car pulley will go straight on, with some marinised engines anyway, take some measurements of crank nose diameter etc.
tabetha

paul16v

Its not like a road car pulley Tabs, its quite large in dia. I will get a pic of it monday when im back at work.

as355f1

get one made at a machine shop, should cost about Ł40
chirton engineering in newcastle can do them.

paul16v

I did think of that, doubt it would be as cheap as Ł40 to machine tho I used to be a turner and there is a few hours work in it to replicate one, and the orgional one is 2 pieces bonded between rubber, must be some sort of anti vibration pulley.

DazC

iTrader: (1)

Can't you see if CDF on here will make you one?

Trist

I am waiting to hear back on one. I work as a marine engineer and some big yanmar engines also have dampered flywheel pulleys.

is this your engine

http://www.bmwmarine.net/b190-030.htm

focusv8

PDF page 45
Manual page 11 of 19
item 13 Vibration damper 11231263879

http://www.bmwmarine.net/manuals/BMWB130B190B220.PDF



.

paul16v

Aye Trist that is the one, that big front pulley.

Top bloke, cheers for making an enquiry for me

focusv8

http://www.realoem.com/bmw/showparts...=11&fg=20&hl=9

http://www.ddmtuning.com/Products/bm...rt-11231263879

.

focusv8

And here's one that tells you what car engine it's fitted to.


http://www.bmwpartscounter.com/showA...ssembly=144303

.

paul16v

The part numbers marry up with the number on this 1 I have, ive been searching for a pulley and they call it a vibration damper thats where ive been stumped.

Much appreciated, passionford at its best

paul16v

Found 1 on US ebay for less than Ł60 delivered

tabetha

Harmonic balancer, they also call it, at least it's sorted and not expensive, certainly cheaper than having a 1 off made!!
tabetha

paul16v

I have to eat a bit of humble pie aswell Tabetha, as they are actually the same as some of the car ones lol