help any mot testers
#1
wheeler dealer
Thread Starter
Join Date: Dec 2009
Location: telford
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
help any mot testers
help needed my ford transit mk5 is due mot the chassis looks solid but when i lifted the wooden flooring in the back there are some large holes in the floor is this a mot fail.
#3
wheeler dealer
Thread Starter
Join Date: Dec 2009
Location: telford
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
#4
Advanced PassionFord User
Join Date: Jun 2003
Location: The BLACK COUNTRY
Posts: 1,797
Likes: 0
Received 0 Likes
on
0 Posts
If vehicle has a chassis (as per your tranny) and is not a monocoque construction then the 30cm from a mounting applies to the floor pan section
As for a repair easiest is to plate inside using a solid line of weld and leave exposed for tester to examine for retest
As a tester I would be happy with that !
As for a repair easiest is to plate inside using a solid line of weld and leave exposed for tester to examine for retest
As a tester I would be happy with that !
#5
wheeler dealer
Thread Starter
Join Date: Dec 2009
Location: telford
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
If vehicle has a chassis (as per your tranny) and is not a monocoque construction then the 30cm from a mounting applies to the floor pan section
As for a repair easiest is to plate inside using a solid line of weld and leave exposed for tester to examine for retest
As a tester I would be happy with that !
As for a repair easiest is to plate inside using a solid line of weld and leave exposed for tester to examine for retest
As a tester I would be happy with that !
Thread
Thread Starter
Forum
Replies
Last Post