-==chunk==-

what one works the best?
the cars spec is gt30 turbo,low comp pistons,bd14 inlet cam and also running autronic sm4
i need the boost controller to control up 30psi there are loads out there and i dont know which one to go for

rs-tuner

iTrader: (1)

I have just bought a gizzmo boost controller for my frs I will be fitting it on Saturday I will let you know what it's like then.seems a good piece of kit and well priced all the jap controllers have gone up cause of the pound is so low

bad boy rs

iTrader: (7)

got a blitz sbc spec-r on my saph works a treat and very simple to fit / use

rstdave

iTrader: (3)

Doesn't autronic support its own boost control solenoid?? Might be worth having a chat with MA developments perhaps and see what mark suggests

turbo_3dr_tommy

lots of good ones mate

i got a Apexi AVC-R in my evo and its excellant
gizzmo are good if your on a budget

-==chunk==-

i think autronic does have its own type of controller mine never got a electronic one fitted i dont know why tho i have seen the jap ones i just want a decent control over the boost up to 30psi

Mike C

iTrader: (1)

I like the Apexi AVC-R myself

-==chunk==-

i have seen that one and i think that will be the one i go for

saph_Al

iTrader: (2)

i got an apexi avcr in mine and it's fookin ace .

RS Grant

iTrader: (1)

Apexi AVC-R is a complex bit of kit, but seriously good when set up properly.


Cheers,
Grant

jaiscossie

Gizmo ones are great for the money, got a greddy profec in mine which is spot on.

lead_foot

iTrader: (1)

Gizzmo MS-IBC is awesome. It just controlls the boost really well and has alot of useful features.

simon170

Has anyone used the Blitz SBC I-Color?

http://www.blitz-uk.co.uk/ProductItem-314.aspx

S1

Got an Apexi AVC-R on me Focus RS, takes some setting up. Best set up by people that know them like Jap-friendly places, ie APT aka our own Christina & Becky on here.

Mark Shead

The Autronic will control the boost better than any controler.

Mark

-==chunk==-

how much is the autronic controller and could i fit it or would i have to bring the car to you?

smitsturbo

is there 1 thats cheep and easy that just controls boost, not a fancy singing & dancing one?

lead_foot

iTrader: (1)

How about a MBC:

http://www.driftworks.com/catalog/pr...rol-valve.html

simple and easy. Set the maximum boost you want to run and control the boost with your right foot.

rsnissan

iTrader: (9)

Profec B

AVCR i have heard starts to struggle at that sort of pressure

tabetha

Why not add the wires etc needed to your ecu, most are far better controllers of boost than aftermarket fittings.
tabetha

mad russell

I will second that it handles my 2.5 bar just fine

Russ