Changing a 4x4 Saff Throttle Cable
#1
Thread Starter
Too many posts.. I need a life!!
Joined: May 2004
Posts: 981
Likes: 0
From: Chaffooooord! Essex
Changing a 4x4 Saff Throttle Cable
Just wondering if it is hard to do and how much it costs?
Mine feels a bit notchy, i tried to lube it but it has gone notchy again
Thanks in advance,
Dave
Mine feels a bit notchy, i tried to lube it but it has gone notchy again
Thanks in advance,
Dave
#3
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2003
Posts: 5,847
Likes: 0
From: Under the Missus ( . )( . )
Piece of piss mate.As long as you can get the clips from the throttle bracket on plenum to let go. .
Hard way.
Disconnect clip on throttle body in engine bay first.Make sure you be careful as this will spring once you lever it off and fly anywhere
This will then loosen tension on pedal.Then unclip pedal.
Then lever/pull out metal clip holding cable in plenum bracket and try and get the cable out of bracket.
Then refitting is a reversal of removal.
EASY way.
Unclip off throttle bady as above.
Cut cable with wire cutters.
Unclip from pedal.
pull out metal clip as above.
Snap off the 4 plastic clips holding the cable in bracket.
Bin cable.
refit new cable.
Hard way.
Disconnect clip on throttle body in engine bay first.Make sure you be careful as this will spring once you lever it off and fly anywhere
This will then loosen tension on pedal.Then unclip pedal.
Then lever/pull out metal clip holding cable in plenum bracket and try and get the cable out of bracket.
Then refitting is a reversal of removal.
EASY way.
Unclip off throttle bady as above.
Cut cable with wire cutters.
Unclip from pedal.
pull out metal clip as above.
Snap off the 4 plastic clips holding the cable in bracket.
Bin cable.
refit new cable.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
JK12
Pictures, video & Photoshop Forum
33
26-04-2021 12:09 PM