processor probs :( **** UPDATED ****
ok soi get a pc off my brother who says it keeps switchin itself off after a short while, so i check the processor - same as mine, so we take the cpu out of mine in an even to try an eliminate the problem wether it be cpu or motherboard, alls going well, refited switch on , all my com does it spins up for approx 3 secs then switches back off
i think , cpu funked
swapped my cpu back in , go and restart , exactly the same, so is the fault that that processor is fooking motherboards ?
is this possible ??
i think my board must now be fooked
and i only bought it about 9 month ago

had to resort to the fookin laptop
any help please ???
mark
i think , cpu funkedswapped my cpu back in , go and restart , exactly the same, so is the fault that that processor is fooking motherboards ?
is this possible ??
i think my board must now be fooked
and i only bought it about 9 month ago

had to resort to the fookin laptop
any help please ???
mark
Before you do that, you might want to check that the fan is making good contact with the CPU. Scrape the heatsink compound off the base of the fan and put a new heatsink pad on with some heatsink paste....
Worth a try....the contact area on an Athlon CPU is very small and I've seen similar things before
Worth a try....the contact area on an Athlon CPU is very small and I've seen similar things before
Trending Topics
***********update ***********
the problem with the non start was core temp over heat !!!! top geezer
but now it will only start to bios, finds hard drives and all floppys , but wont go to xp operating systems,
just keeps giving options for safe mode, last known good setting , start normally etc etc
and a count down, non of these options do anything, the comp just freezes once the timer stops
more help ???
cheers dudes
the problem with the non start was core temp over heat !!!! top geezer
but now it will only start to bios, finds hard drives and all floppys , but wont go to xp operating systems,
just keeps giving options for safe mode, last known good setting , start normally etc etc
and a count down, non of these options do anything, the comp just freezes once the timer stops
more help ???
cheers dudes
ive only tried changing boot sequence to try and sort this lack of booting problem, it wont even boot from cd ,
ive had enough now for tonight m], fookin ell i only took a fookin processor out , its notlike ive never done it before
cheers guys
ive had enough now for tonight m], fookin ell i only took a fookin processor out , its notlike ive never done it before

cheers guys
my PCs being running real crap and doing same kinda thing but mine has been lasting 5 hours or so.
ive taken the case off and its better.
ive still got quite high CPU temps on average now 50ish i think and PC is noisey.
have i got similar problems? as mine is xp2400 amd thingy similar
ive taken the case off and its better.
ive still got quite high CPU temps on average now 50ish i think and PC is noisey.
have i got similar problems? as mine is xp2400 amd thingy similar
PassionFord Post Whore!!
Joined: Sep 2003
Posts: 4,519
Likes: 1
From: Macclesfield - you'll never leave....!
this sounds very much like the main pc powersupply - i had one do the same - ended up buying a new 10 quid power supply for the case from microdirect and all was fine - it would be ok until it tryed to do any work and loaded up the powersupply , so on first startup , it could reboot say 15-20 times if u left it to it before it finally got into windows, then u would launch something that made the cpu work for a few seconds and "click" reboot again.
20K+ Super Poster.
Joined: May 2003
Posts: 20,599
Likes: 0
From: Ramsgate, Kent Drives: E39 530D Touring
ive taken the case off and its better
Originally Posted by Daveyboy
i'll second the psu theory. Also seen it myself a few times 
Me Third it too, cos ive had a couple do it.
One i had started kicking out 2 much juice, and fooking the new boards i was connecting up, it was woudl start for a few secs then shut off.
Thread
Thread Starter
Forum
Replies
Last Post
TPM961
Restorations, Rebuilds & Projects.
19
Jan 15, 2018 10:50 AM







