How rare is this Granada Mk3 RS Bodykit??
#1
no more Granada's for me
Thread Starter
How rare is this Granada Mk3 RS Bodykit??
Ive only seen a select few granada's with it on, is it like rocking horse sh*t or not.. I won it last night on ebay, i wanna put it on my magenta granada 24v saloon, but i'm thinkin, should i maybe repair the front bumper and put the kit in the loft for a few year if its that rare, the problem is, I wanna use the bottom half of the front bumper an mate it with my original bumper an do the same with the back an modify the side skirts, but should I?? so the question is, put it on the car, or in the loft???
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=230387286870
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=230387286870
#4
PassionFord Post Whore!!
iTrader: (1)
Karlos is that for the same shape granada then? i thought it would be for the rounder "teardrop" shape.
They look similar to the si bumpers to me, which i dont like anyway on the fiestas. they're too round for a boxy car, same for the Granada.
If it were a mk2 granada Ghia X Kit, then you could retire on that
They look similar to the si bumpers to me, which i dont like anyway on the fiestas. they're too round for a boxy car, same for the Granada.
If it were a mk2 granada Ghia X Kit, then you could retire on that
Last edited by orionmojo; 22-10-2009 at 10:07 AM.
#6
st170 breaking
tis fairly rare but your are putting a bodykit on a granada, that seems alien to me
dont think i'd bother myself and thats a fair pile of money to pay too, these were fairly regular cars we took away on a sec 165 (no insurance etc) i loved smashin em up before we crushed them, quite a few cossie grandads too
dont think i'd bother myself and thats a fair pile of money to pay too, these were fairly regular cars we took away on a sec 165 (no insurance etc) i loved smashin em up before we crushed them, quite a few cossie grandads too
#7
Balls Deep!
iTrader: (4)
Karlos is that for the same shape granada then? i thought it would be for the rounder "teardrop" shape.
They look similar to the si bumpers to me, which i dont like anyway on the fiestas. they're too round for a boxy car, same for the Granada.
If it were a mk2 granada Ghia X Kit, then you could retire on that
They look similar to the si bumpers to me, which i dont like anyway on the fiestas. they're too round for a boxy car, same for the Granada.
If it were a mk2 granada Ghia X Kit, then you could retire on that
i prefer the older shape.
Last edited by Karlos G; 22-10-2009 at 10:44 AM.
Trending Topics
#8
no more Granada's for me
Thread Starter
#10
no more Granada's for me
Thread Starter
tis fairly rare but your are putting a bodykit on a granada, that seems alien to me
dont think i'd bother myself and thats a fair pile of money to pay too, these were fairly regular cars we took away on a sec 165 (no insurance etc) i loved smashin em up before we crushed them, quite a few cossie grandads too
dont think i'd bother myself and thats a fair pile of money to pay too, these were fairly regular cars we took away on a sec 165 (no insurance etc) i loved smashin em up before we crushed them, quite a few cossie grandads too
#11
no more Granada's for me
Thread Starter
#13
no more Granada's for me
Thread Starter
http://i789.photobucket.com/albums/y...mat2000/f3.jpg
my plan is to take the bottom half of the front and rear rs kit and mate it to my bumpers, i have a spare front and rear bumper so if it don't go to plan i can just keep my car as it is, I don't like how bubbly the front bumper is, so taking the top part off and using the skirt and fogs is the plan. with side skirts and the rear spoiler is already on my car anyway. as many of you would, I'm more than happy to spend 1000's on my granada, i don't ever plan on gettin rid of it so i may as well.
#14
no more Granada's for me
Thread Starter
here's a similar pic of mine
http://i789.photobucket.com/albums/y...mat2000/f5.jpg
and heres a pic of one the same colour with the rs kit on
http://i789.photobucket.com/albums/y...elygranada.jpg
different wheels I know, but thats a future plan.. now this one with the kit on was on ebay a few months ago an bid upto 2300 quid. mine has less miles and has never had welding, the ebay one had
http://i789.photobucket.com/albums/y...mat2000/f5.jpg
and heres a pic of one the same colour with the rs kit on
http://i789.photobucket.com/albums/y...elygranada.jpg
different wheels I know, but thats a future plan.. now this one with the kit on was on ebay a few months ago an bid upto 2300 quid. mine has less miles and has never had welding, the ebay one had
#15
no more Granada's for me
Thread Starter
here's a similar pic of mine
http://i789.photobucket.com/albums/y...mat2000/f5.jpg
and heres a pic of one the same colour with the rs kit on
http://i789.photobucket.com/albums/y...elygranada.jpg
different wheels I know, but thats a future plan.. now this one with the kit on was on ebay a few months ago an bid upto 2300 quid. mine has less miles and has never had welding, the ebay one had
http://i789.photobucket.com/albums/y...mat2000/f5.jpg
and heres a pic of one the same colour with the rs kit on
http://i789.photobucket.com/albums/y...elygranada.jpg
different wheels I know, but thats a future plan.. now this one with the kit on was on ebay a few months ago an bid upto 2300 quid. mine has less miles and has never had welding, the ebay one had
#18
no more Granada's for me
Thread Starter
#19
bumpers
does any one know if a scopio bug eye back bumper will fit a mark 3 series 1 back bumper granada im thinking of doing a conversion but i need to know first and does the rs front splitter come off or does it stay on the bumper cause i want to take it off my series 2 and put it on my 1
#22
PassionFord Post Whore!!
#23
#24
#25
no more Granada's for me
Thread Starter
yeah, i got made redundant the next day so i had to back out, paid his listing charges as a good will type thing, i value my feedback. hope you got it then mate, i still wanted it really but couldn't justify spending 150 quid when i had no job, luckily found a job the next week so i could have had it after all
#26
wot horse powers your cosworth ive had mine rolling roaded and its 214 bhp it can do 135 in 3 gear im glad you found anouther job it cost me anouther 60 pounds on top to go and pick it up im like you i love me grannys got to ones got a small block chevy in 300 bhp
#27
yeah, i got made redundant the next day so i had to back out, paid his listing charges as a good will type thing, i value my feedback. hope you got it then mate, i still wanted it really but couldn't justify spending 150 quid when i had no job, luckily found a job the next week so i could have had it after all
#28
no more Granada's for me
Thread Starter
ive never had mine rolling roaded, its had no engine mods. so not sure, i though they were about 195bhp standard, but unfortunately my engine has seen better days, its off the road at the minute for winter. got another 24v engine in my shed that i'm cleaning up, it had the timing chain done 11,000 mile ago at a cost of over a grand. found the reciept in the car i took it out of. sweet that engine. some people on here have been saying if you put the cams out of the scorpio BOB 24v engine an put vectra v6 injectors on it then it gets rid of the flat spot between 1 and 3,000 revs, I want to do a manual gearbox conversion on mine..
when cosworth originally came up with the 24v engine based on the old 2.9. they went to ford with a figure of 300bhp, but ford didn't have a traction control device for the granada, so they knocked it down to 200 ish, they wanted it to still be a luxury brand not a high performance brand. but 300 is easily done apparently.
when cosworth originally came up with the 24v engine based on the old 2.9. they went to ford with a figure of 300bhp, but ford didn't have a traction control device for the granada, so they knocked it down to 200 ish, they wanted it to still be a luxury brand not a high performance brand. but 300 is easily done apparently.
#29
C.R.E.A.M.
iTrader: (1)
i know that car and have been in it and under it,it was or could still be if eric didn't sell it in ellesmere port,my mate put the kit on it for him and it was a right twat to go on,it was a bit hard to fit as the kit wasn't genuine iirc,the front bumper needed gallons of fibreglass to get it into shape,the car has been to top boss in derby and had allsorts done to it although not twin turboing.the wheels are amg merc cos if you look close they are much wider than normal cozzie granny.
cruises quite well at 130 mph
cruises quite well at 130 mph
#30
bhpower
ive never had mine rolling roaded, its had no engine mods. so not sure, i though they were about 195bhp standard, but unfortunately my engine has seen better days, its off the road at the minute for winter. got another 24v engine in my shed that i'm cleaning up, it had the timing chain done 11,000 mile ago at a cost of over a grand. found the reciept in the car i took it out of. sweet that engine. some people on here have been saying if you put the cams out of the scorpio BOB 24v engine an put vectra v6 injectors on it then it gets rid of the flat spot between 1 and 3,000 revs, I want to do a manual gearbox conversion on mine..
when cosworth originally came up with the 24v engine based on the old 2.9. they went to ford with a figure of 300bhp, but ford didn't have a traction control device for the granada, so they knocked it down to 200 ish, they wanted it to still be a luxury brand not a high performance brand. but 300 is easily done apparently.
when cosworth originally came up with the 24v engine based on the old 2.9. they went to ford with a figure of 300bhp, but ford didn't have a traction control device for the granada, so they knocked it down to 200 ish, they wanted it to still be a luxury brand not a high performance brand. but 300 is easily done apparently.
#31
Regular Contributor
Join Date: Sep 2008
Location: bollock deep in walsall
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
someone from a local club has one for a run around while his escort mk2 is restored
its got 64k and 1 owner he paid £600 of a friend of the family
not really a fan but would have one for that price
its got 64k and 1 owner he paid £600 of a friend of the family
not really a fan but would have one for that price
#32
Resident Wrestling Legend
iTrader: (3)
when cosworth originally came up with the 24v engine based on the old 2.9. they went to ford with a figure of 300bhp, but ford didn't have a traction control device for the granada, so they knocked it down to 200 ish, they wanted it to still be a luxury brand not a high performance brand. but 300 is easily done apparently.
you can get 300 with some throttle bodies
#33
15000
Join Date: Nov 2009
Location: Ashby de la zouch, leicestershire, england
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Ive never seen a bodykit for a granny like that before, its not a bad looking kit and looks even nicer with the amg rims. How do you granny guys get on with the automatic gearboxes these days, i had two 2.9i ghias with low miles and both had gearbox issues eg, losing fluid or exploding or eventually both. If only they did a cossie 24v manual
#34
#35
Resident Wrestling Legend
iTrader: (3)
Ive never seen a bodykit for a granny like that before, its not a bad looking kit and looks even nicer with the amg rims. How do you granny guys get on with the automatic gearboxes these days, i had two 2.9i ghias with low miles and both had gearbox issues eg, losing fluid or exploding or eventually both. If only they did a cossie 24v manual
and yes, the boxes are specific to the cossie motor but there are still at least 3 different versions on the boa and more for the bob
not sure, but there was a racing series that had them all pegged at about 300 horses, with tb's and the like, there was a mag feture way back when as well which may shed more light on teh matter
#38
Fast Ford snapper
Not a pretty kit that one, never liked it.
Mk3 Granadas look great simply slammed on AMG rims.
No need for either the fussy RS kit or blobby Scorpio style one...
Mk3 Granadas look great simply slammed on AMG rims.
No need for either the fussy RS kit or blobby Scorpio style one...
#39
no more Granada's for me
Thread Starter
#40
ive never had mine rolling roaded, its had no engine mods. so not sure, i though they were about 195bhp standard, but unfortunately my engine has seen better days, its off the road at the minute for winter. got another 24v engine in my shed that i'm cleaning up, it had the timing chain done 11,000 mile ago at a cost of over a grand. found the reciept in the car i took it out of. sweet that engine. some people on here have been saying if you put the cams out of the scorpio BOB 24v engine an put vectra v6 injectors on it then it gets rid of the flat spot between 1 and 3,000 revs, I want to do a manual gearbox conversion on mine..
when cosworth originally came up with the 24v engine based on the old 2.9. they went to ford with a figure of 300bhp, but ford didn't have a traction control device for the granada, so they knocked it down to 200 ish, they wanted it to still be a luxury brand not a high performance brand. but 300 is easily done apparently.
when cosworth originally came up with the 24v engine based on the old 2.9. they went to ford with a figure of 300bhp, but ford didn't have a traction control device for the granada, so they knocked it down to 200 ish, they wanted it to still be a luxury brand not a high performance brand. but 300 is easily done apparently.
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
Steve Escos
Ford RS Turbo Parts for Sale
0
01-10-2015 06:57 AM