fuel/swirl pot picture
22-05-2009, 08:57 AM
#2
Too many posts.. I need a life!!
Join Date: Jun 2003
Location: West Sussex
Posts: 682
Likes: 0
Received 0 Likes
on
0 Posts
I plumbed mine in using the following:
top port - back to tank
middle port 1 - feed from pull pumps
middle port 2 - return from fuel rail
bottom port - feed to injection pump
top port - back to tank
middle port 1 - feed from pull pumps
middle port 2 - return from fuel rail
bottom port - feed to injection pump
22-05-2009, 12:19 PM
#4
Too many posts.. I need a life!!
Join Date: Jun 2003
Location: West Sussex
Posts: 682
Likes: 0
Received 0 Likes
on
0 Posts
I'm afraid I don't.
I use an Ex-WRC Bladder tank supplying 2 red tops (pull from the tank) which fill the 2 litre swirl pot which feeds a single 044 (push). And its all plumbed in as above.
I use an Ex-WRC Bladder tank supplying 2 red tops (pull from the tank) which fill the 2 litre swirl pot which feeds a single 044 (push). And its all plumbed in as above.
Thread
Thread Starter
Forum
Replies
Last Post