Basic setting up for steering tracking ??
Adam, Surely as the car is up in the air they will sit a little out....but what they like when some weight it on it? (being on the floor) They shouldn't camber outwards that much surely 
Ever thought about getting some adjustable bottom Arms like C+B have?
Ever thought about getting some adjustable bottom Arms like C+B have?
Trending Topics
Thread Starter
Ex Ford Man
Joined: May 2003
Posts: 6,725
Likes: 0
From: West Sussex
Smit, on the ground the wheels are sitting like \---/ 
I have a adjustable TCA's but camber is not my problem, its the tracking
Guess i just need to keep adjusting the track ends till there straight
(No, i can't get it to a alignment place, before anyone says)
I have a adjustable TCA's but camber is not my problem, its the tracking
Guess i just need to keep adjusting the track ends till there straight
(No, i can't get it to a alignment place, before anyone says)
10K+ Poster!!
Joined: May 2003
Posts: 13,146
Likes: 0
From: Newbury
But at some tracking places can get to you....!
You want the wheels to be about:
| ---- |
toe out looks like:
\ ----- /
toe in looks like:
/ ----- \
You need a little of toe (either in or out it depends on the car fwd/rwd).
You also need to make sure the back wheels point in the right direction as that is EVEN MORE important!!!!
Alex
You want the wheels to be about:
| ---- |
toe out looks like:
\ ----- /
toe in looks like:
/ ----- \
You need a little of toe (either in or out it depends on the car fwd/rwd).
You also need to make sure the back wheels point in the right direction as that is EVEN MORE important!!!!
Alex
Thread Starter
Ex Ford Man
Joined: May 2003
Posts: 6,725
Likes: 0
From: West Sussex
Alex,
Yeah, mines Toe out at the mo, or one side is more than the other.
What i'm trying to find out if is there is a basic setting i.e screw the track end all in the way in and turn it 4 full turns each side
Yeah, mines Toe out at the mo, or one side is more than the other.
What i'm trying to find out if is there is a basic setting i.e screw the track end all in the way in and turn it 4 full turns each side
O right getting ya now! 
My runabouts tracking fucked up ended up getting it lasered...they put the steering wheel dead staright..click the steering lock on and then undo the track rod ends......move the wheel straight (with the aid on the lasers which are attached to the wheels! and wind them/on further/off further then lock them with the nut...and hey presto! | --- |
well that's what happens anyway
My runabouts tracking fucked up ended up getting it lasered...they put the steering wheel dead staright..click the steering lock on and then undo the track rod ends......move the wheel straight (with the aid on the lasers which are attached to the wheels! and wind them/on further/off further then lock them with the nut...and hey presto! | --- |
well that's what happens anyway
Advanced PassionFord User
Joined: May 2004
Posts: 2,271
Likes: 1
From: Selborne Hampshire
Originally Posted by blackRS
Alex,
Yeah, mines Toe out at the mo, or one side is more than the other.
What i'm trying to find out if is there is a basic setting i.e screw the track end all in the way in and turn it 4 full turns each side
Yeah, mines Toe out at the mo, or one side is more than the other.
What i'm trying to find out if is there is a basic setting i.e screw the track end all in the way in and turn it 4 full turns each side
answers no
Thread
Thread Starter
Forum
Replies
Last Post