xr2i-carl

245bhp one, what do they do 1/4mile in standard? low 14's? under 100?

xr2i-carl

Cumon guys, i need answer quick.

C4llyT

13.9 - 14.0 they should hit.

xr2i-carl

Really? thats good going, at what mph? 95ish?

C4llyT

100mph.
This is off a stats site, same bhp per tonne as an E36 M3 though which will do a 14 if a good one etc, so should be there or there abouts.

taycoss

As far as i can mind my best at crail was around 14.1 secs with a knackered clutch but was slightly altered from standard due to de-cat and filter.

Oranoco

I should have thought they'd go quite well. I done a 14.75 @103mph in my then 248bhp ERST with a full stereo install in the boot (lots of MDF, subs and amps = heavy).

MR2 must get off the line better than old FWD Escort

xr2i-carl

So not actual times and mph you know of or heard of Cally thanks anyhow bud. Least i got rough idea.

Oranoco is that the best you ran with 248?

Oranoco

It's the only time it was timed at that level and I haven't had a good run with it as it stands now as it keeps over fueling when going from 2nd to 3rd giving a horrible flat spot where nothing happens still did a 105mph terminal.

I hope once I finally get off my arse and start work on the car again it will pull 13's and terminal at about 110mph

I just can't launch the bloody thing. Don't know if it's me or the car but it just bogs down or lights the tyres

xr2i-carl

Whats your current spec then mate?

Ellie

rev 3 and onwards(241bhp) usually 13.8 but 13.5/13.6 has been done

Oranoco

Everything bar being converted to EFi, 260bhp 250lb torque

C4llyT

Nope just an idea from power etc.
You wanted an idea quick...!
Must be an owners forum with the info on it somewhere.

xr2i-carl

from only 242bhp? or 245ps etc? what mph?

Ellie

241bhp, 220lb of torque, 0-60 5.3, 1/4miles in 13.8, tho there have been videos of them doing 13.6s, 13.5s..

http://mr2oc.co.uk/ForumsPro/viewtop...e+figures.html

really good site.