a good inlet/plenium to mod for zetec?
#3
Too many posts.. I need a life!!
#7
PassionFord Post Whore!!
Trending Topics
#8
PassionFord Post Whore!!
Join Date: May 2004
Location: Oldham + Fast Ford
Posts: 4,657
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Are you on a budget?
If not, tons of decent options.![Smile](https://passionford.com/forum/images/smilies/icon_smile.gif)
Planned power levels?
Area Six and stuff like the one above.
RS1800 or EFI inlet
If on a budget, the rover ones have seen decent results in the past. I have seen a Cossie one used. I'm trying to get one to fit on mine, but won't say until fitted and ideally tested![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Could be a good thread this.
Keep the options coming chaps!
If not, tons of decent options.
![Smile](https://passionford.com/forum/images/smilies/icon_smile.gif)
Planned power levels?
Area Six and stuff like the one above.
RS1800 or EFI inlet
If on a budget, the rover ones have seen decent results in the past. I have seen a Cossie one used. I'm trying to get one to fit on mine, but won't say until fitted and ideally tested
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Could be a good thread this.
Keep the options coming chaps!
#9
Colossal Pervert
![Default](https://passionford.com/forum/images/icons/icon1.gif)
crazycage- I was contemplating doing a plenum like that on a Rover manifold (although slightly larger).. who did that one? Does it have trumpets inside?
#10
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ps, if i made another one i would put all the vac pipes underneath.
#11
PassionFord Post Whore!!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: chingford, london
Posts: 7,827
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
kind of on a budget atm as im not working but was thinking in poss using a cossie one. Do they have trumpets as standard?
crazy cage-ill bare it in mind mate cheers, ive got a mate who can weld so was looking for something that he can adapt for me, i.e changing flanges etc etc
crazy cage-ill bare it in mind mate cheers, ive got a mate who can weld so was looking for something that he can adapt for me, i.e changing flanges etc etc
#13
PassionFord Post Whore!!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: chingford, london
Posts: 7,827
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
The thing being with the standard inlet is i dont like the look of it
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#15
PassionFord Post Whore!!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: chingford, london
Posts: 7,827
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
anyone else got any other options? im trying to get the car back on the road like before with improved spec, would also like to see options for exhaust manifolds please? would like a gt30 flange too
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#16
10K+ Poster!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
The standard rover manifold doesnt have trumpets inside the plenum.
Here's a few photo's of my mates rover manifold modified to fit a zetec, you can see how the 2 half's fit together, it might clear things up for those looking to modify one
or it might not ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3434.jpg)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3428.jpg)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3431.jpg)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3783.jpg)
Apart from the plenum, the manifold crazycage's manifold is a rover one.
Here's a few photo's of my mates rover manifold modified to fit a zetec, you can see how the 2 half's fit together, it might clear things up for those looking to modify one
![](https://passionford.com/forum/images/smilies/roi.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3434.jpg)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3428.jpg)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3431.jpg)
![](http://img.photobucket.com/albums/0903/Red16/Forged%20Zetec%20Turbo%20Build/IMG_3783.jpg)
Apart from the plenum, the manifold crazycage's manifold is a rover one.
#17
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ive got a complete cossie inlet if your interested ??
#20
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i have a nissan pulsar GTiR manifold i was goign to fit to my fiesta. theyre awesome inlets, miles better than the rover ones. 42mm (iirc) throttle bodies for each port, radius's (i know :cry) cast into the plenum. very very good design. and the ports are only about 2mm off from the zetec head so very easily matched with a bit of work with a diegrinder and spacer plate. im sure folks whore more knowledgeable on pulsars will have more info on them, what power they can be used for etc.
ive still got mine with no use for it if youre interested mate.
ive still got mine with no use for it if youre interested mate.
#21
PassionFord Post Whore!!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: chingford, london
Posts: 7,827
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i have a nissan pulsar GTiR manifold i was goign to fit to my fiesta. theyre awesome inlets, miles better than the rover ones. 42mm (iirc) throttle bodies for each port, radius's (i know :cry) cast into the plenum. very very good design. and the ports are only about 2mm off from the zetec head so very easily matched with a bit of work with a diegrinder and spacer plate. im sure folks whore more knowledgeable on pulsars will have more info on them, what power they can be used for etc.
ive still got mine with no use for it if youre interested mate.
ive still got mine with no use for it if youre interested mate.
![](https://passionford.com/forum/images/smilies/roi.gif)
#27
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
yeah youre right but i cant see that offset made up over a distance making to much difference.
iirc they would need to be mounted at an angle. so would need a small manifold similar to you get when fitting carbs, with the mounting face for the inlet at around 45degrees to the head face. this would allow you to even up that offset without any trouble and match them both ends perfectly. thats what i intended on doing anyway. ive stripped the car and sold it all now though so as i say, no use to me.
rad, i thought they were good for even more than that but im no expert as i say!
iirc they would need to be mounted at an angle. so would need a small manifold similar to you get when fitting carbs, with the mounting face for the inlet at around 45degrees to the head face. this would allow you to even up that offset without any trouble and match them both ends perfectly. thats what i intended on doing anyway. ive stripped the car and sold it all now though so as i say, no use to me.
rad, i thought they were good for even more than that but im no expert as i say!
#28
I've found that life I needed.. It's HERE!!
#29
PassionFord Post Whore!!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: chingford, london
Posts: 7,827
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
the engine is built, i meant i havnt got money to waste on experimenting due to being out of work for a while a little while back, then getting work, then company going under whilst owing me my wages, then crashing jims m3 and then i broke wrist so couldnt work but needs must so i went back after 3 weeks off with wrist in plaster (im self employed
)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#30
PassionFord Post Whore!!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: chingford, london
Posts: 7,827
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
and engine wise is a freshly built 2.1 zt with farndon steel rods, let pistons, new shells, mains, pumps etc and balance with arp stud and nut kit, felpro zt head gasket, area-six valve springs and cam with a gt30
#32
I've found that life I needed.. It's HERE!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
the engine is built, i meant i havnt got money to waste on experimenting due to being out of work for a while a little while back, then getting work, then company going under whilst owing me my wages, then crashing jims m3 and then i broke wrist so couldnt work but needs must so i went back after 3 weeks off with wrist in plaster (im self employed
)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
cossie build as well
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
I will post a pic of my very modified 2wd inlet when I get it back
next week
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Good luck,puddy
#34
escort mk4 cossy 4x4
Join Date: May 2004
Location: coventry
Posts: 4,629
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i iam looking at using the st170 plastic manifold,with the injector set up.
cossy 4x4 inlet,with alloy tubes welded in,to connect to the st 170 connections.
all aligned to give a good flow angle into the cylinders.
cossy 4x4 inlet,with alloy tubes welded in,to connect to the st 170 connections.
all aligned to give a good flow angle into the cylinders.