How dangerous is your job ??
#121
Patronus
i'd rate my job at a 6.5
I run 2 warehouses - on my own all day in both stores, one forklift is a gas 10T rated capable the other is an oooold (it was made in '73 ) electric lancing bagnal ! basicly, if i were to have an accident at work in the morning, i would be stuck until around 4pm when the company drivers turn up to pick up the goods out. The nicest bit about it is, is that according to the HSE peoples because i am the one putting the stuff in the warehouse, if a 700kg pallet lands on my head... it's my own fault, hence the company isn't considered liable ! how pleasant is that !
The biggest hazard where i work is actually other people - people that don't work in warehouses / on forklifts dont understand that standing behind the truck in the drivers blind spot is a fuckin stupid idea. I've made people sit in their cars / cabs or whatever purely because of their own fuckin stupidity before ! Stopping a 10t capable forklift with a fuck off great big load on the front isn't as simple as some people think it is !
i showed one bloke a demonstration one day, got a pallet of knackered pallet wrap from the quaranteen section ( the pallet tips the scales a 1.3t ) and proceeded to drive into the rest of the quaranteen'd stuff - the forks went straight through two rolls of pallet wrap.. then i explained to him that had he been standing in front of it and the forks had hit him, he'd be a big bloody mess on the floor - dead.
rant over.
I run 2 warehouses - on my own all day in both stores, one forklift is a gas 10T rated capable the other is an oooold (it was made in '73 ) electric lancing bagnal ! basicly, if i were to have an accident at work in the morning, i would be stuck until around 4pm when the company drivers turn up to pick up the goods out. The nicest bit about it is, is that according to the HSE peoples because i am the one putting the stuff in the warehouse, if a 700kg pallet lands on my head... it's my own fault, hence the company isn't considered liable ! how pleasant is that !
The biggest hazard where i work is actually other people - people that don't work in warehouses / on forklifts dont understand that standing behind the truck in the drivers blind spot is a fuckin stupid idea. I've made people sit in their cars / cabs or whatever purely because of their own fuckin stupidity before ! Stopping a 10t capable forklift with a fuck off great big load on the front isn't as simple as some people think it is !
i showed one bloke a demonstration one day, got a pallet of knackered pallet wrap from the quaranteen section ( the pallet tips the scales a 1.3t ) and proceeded to drive into the rest of the quaranteen'd stuff - the forks went straight through two rolls of pallet wrap.. then i explained to him that had he been standing in front of it and the forks had hit him, he'd be a big bloody mess on the floor - dead.
rant over.
#124
**Mk2 Focus Rs**
Join Date: Oct 2009
Location: Essex
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
id rate my job as 3 mostly because although i wk in a DIY shop which isnt 2 me very dangerous the customers when complaining can turn violent at any time so id say 3 is a safe bet!!hehe xxxx
#125
Franco
Join Date: Sep 2004
Location: Raunds, Northants
Posts: 3,451
Likes: 0
Received 0 Likes
on
0 Posts
#127
PassionFord Post Whore!!
Join Date: May 2003
Location: aldershot
Posts: 3,577
Likes: 0
Received 0 Likes
on
0 Posts
I am a Petroleum Operator in the Army, so can be sat in helmand province with around 2 million litres of diesel and avtur at any occasion in the bulk fuel instalation that we build to provide the task force with motion lotion. so with the heat of the day making the fuel more volatile and the risk of mortars and good ol american misfires it could be a bit of a disaster i think so i would give it a 10. plus hot fuelling an an apache gunship fully loaded and ready for action can be a bit hairy when the pilot looks at you with his eye peie down and the 30mm cannon folows hisevery move, hands up yes sir of course i filled it too the brim lol
#128
#129
Happily retired
Mines a -47 .
Im retired & the daily drive to get my paper & the stop off at my local coffee shop to read it is obviously very dangerous. Mind you Watching all the young ladies walk by is dodgy for my health at my age .
Im retired & the daily drive to get my paper & the stop off at my local coffee shop to read it is obviously very dangerous. Mind you Watching all the young ladies walk by is dodgy for my health at my age .
#133
Wahay!! I've lost my Virginity!!
Join Date: Nov 2007
Location: peterborough
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
I'd say 0.5... Im a home delivery driver for asda.. so not at all dangerous...although just last night I had a group of asian chaps trying to get into my van and confronting me as i was unloading.. anyone who knows peterborough will know that Gladstone street isn't a nice place to go at night..
#134
Zetec S Owners
Join Date: Jan 2008
Location: South Yorkshire
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Mines about a 1 or 2, i suppose i could fall off my chair lol
But then again its the people that you work with too, I suppose you could up it to a 6 or 7 espc when one of the techs made the building live, or blew the 110v transformer
But then again its the people that you work with too, I suppose you could up it to a 6 or 7 espc when one of the techs made the building live, or blew the 110v transformer
#135
Too many posts.. I need a life!!
Join Date: Oct 2005
Location: crewe,cheshire
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
about a 10.5 for me
i work in lane three of the motorway repairing the barriers with only a metre high cone seperating the dicks doing 80+mph past us.
in the last 6 years we have lost 5 men,2 lads were working with me at the time.
dave
i work in lane three of the motorway repairing the barriers with only a metre high cone seperating the dicks doing 80+mph past us.
in the last 6 years we have lost 5 men,2 lads were working with me at the time.
dave
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM