rog

iTrader: (2)

Thinking about changing to areoquip fuel lines as my whole fuel system is off the car and i need to change the lines anyway, how much will i need to go from pump to fuel rail, and back again?????

JonnyBravo

6 metres IMO

Paul_RS

iTrader: (4)

On a sapph cossie you need 10 meteres to be safe, you have to take all the wee bends and strange routes into account.

Fudgey

iTrader: (4)

i used 10M but got a fuel cell in the boot. bit under 3m each for feed and return through car, then about 1.5m for fuel rail to fpr and back to bulkhead fittings
then 1.5. for breather into roof, and 1m for filler vent

JonnyBravo

I'm assuming he just meant to replace the oe lines, not a swirl pot/incar tanks setup ?

If not 10 metres is about right

rog

iTrader: (2)

Just found this post again, yes just to replace the feed from the pump to the rail and back to the tank. Cheers!

Mark RS

iTrader: (13)

just done mine and it was just shy of 10 meters