Quickest way to drop rear beam/diff/shafts etc.. on 4x4???
22-07-2008, 10:04 AM
#1
Quickest way to drop rear beam/diff/shafts etc.. on 4x4???
Like this?
I obviously know you have to disconnect the brake lines, and handbrake (not sure how this comes out the caliper), what next, unbolt the diff hanger and beam and prop or????
I obviously know you have to disconnect the brake lines, and handbrake (not sure how this comes out the caliper), what next, unbolt the diff hanger and beam and prop or????
22-07-2008, 10:12 AM
#2
0-60 in 17 seconds (eek)
Join Date: Apr 2004
Location: Berkshire
Posts: 6,717
Likes: 0
Received 0 Likes
on
0 Posts
Not entirely sure, however...
You need to loosen the cable at the handbrake end (just behind g-box above the propshaft), and unhook it there so you get enough play to remove the eyelets off the calipers.
Hope this helps a bit.
You need to loosen the cable at the handbrake end (just behind g-box above the propshaft), and unhook it there so you get enough play to remove the eyelets off the calipers.
Hope this helps a bit.
Thread
Thread Starter
Forum
Replies
Last Post
