Airtec intercoolers
#4
PassionFord Post Troll
iTrader: (8)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Yeah i would reccomend them, only thing with front mounts your rst will run hotter as they restrict the air flow to the rad so might be an idea to run a lower temp stat in it say 82 deg.
also you have to cut a fair bit out the bumper if its an 80 spec
also you have to cut a fair bit out the bumper if its an 80 spec
![](http://i126.photobucket.com/albums/p90/neeban/06032008046.jpg)
Last edited by coswurv; 21-07-2008 at 07:53 AM.
Trending Topics
#10
PassionFord Post Troll
iTrader: (8)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
well people say they are a shit fit but at the end of the day the dimentions for front mounts are all pretty much the same as theres only so much room to fit them in so dont listen to that, here's some pics of one setup i fitted on a zvh i built and after the rolling road setup i got good afr numbers etc so the cooler was doing its job,
![](http://i126.photobucket.com/albums/p90/neeban/26022008028.jpg)
![](http://i126.photobucket.com/albums/p90/neeban/06032008045.jpg)
#12
PassionFord Regular
Join Date: May 2006
Location: Wales
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Most of the coolers are much of a muchness, as said above the are are simular size, so the only difference really would be the design of the end tanks for better flow.
The only cooler that has really stood out amongst the crowd (for the S1 as this is what I have looked into, but have heard the same for S2) is the GRS twin pass cooler.
The only cooler that has really stood out amongst the crowd (for the S1 as this is what I have looked into, but have heard the same for S2) is the GRS twin pass cooler.
#14
PassionFord Post Troll
Join Date: Jan 2006
Location: You will never know. Now fook off
Posts: 3,089
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I don't think i have said that right? All i am saying is that a lot of people hear things but don't know if its really true. I can say the airtec is good. Cos i have heard it. But never used one. So how would i know if its good then?
#17
![Default](https://passionford.com/forum/images/icons/icon1.gif)
boothy, when you say you have one on your s2, what type is it. Is it the one with the removable side plate and fans to the rear, or the slightly larger one with fans to the front.
Thanks
Gaz.
Thanks
Gaz.
#18
Too many posts.. I need a life!!
Join Date: May 2006
Location: thurrock essex
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ive got one on my rst great bit of kit i brought a water swirl pot too when i got mine as the heat does rise but the swirl pot makes it cooler again it always reads between 1/4- 1/2 even when in traffic.
i would recommend them
try autospecialists
i would recommend them
try autospecialists
Thread
Thread Starter
Forum
Replies
Last Post
Russ Payne
Ford Sierra/Sapphire/RS500 Cosworth
1
25-09-2015 08:29 PM