tabetha

Hi,
Need a VAG 235 SIGNAL CONDITIONING UNIT, that goes with the EGR sensor on a audi 1.8 Turbo engine, from audi TT etc.
Is there any obvious place/tuner for this part, as Euro car parts not much help, they kept saying do you mean the lambda sensor, to which five times I replied no, it senses TEMPERATURE in the exhaust, that is why it is called a EXHAUST GAS TEMPERATURE sensor, surely this is clear enough!!
Thanks
tabetha

Bobby Singh

anything of here any good to u?



I took out the egr and heat exchanger off my golf tdi

Lee Ivatt

iTrader: (1)

try GSF car parts or EURO car parts, or even unipart/part Co

tabetha

Bobby Singh,
Unfortunately, no parts there any good to me, but than you for the repsonse anyway.
Lee Ivatt,
I did not even think about GSF, thanks for reminding me!!
I managed to track down the EGT sensors on bosch-motorsport.com, but they list 6 different ones!!
tabetha

Franco

iTrader: (2)

http://www.audi-sport.net/vb/

Might be worth a punt on here!

tabetha

I'll have a look on there later with more time, thanks.
tabetha

jr

the one i "think" it is is 06a919529b, which retails £128.54

tabetha

OK,
Kool, will have a look at that later, thanks.
tabetha

richm

any luck with finding this anywhere but Audi dealer?
I'm after the whole thing too, sensor and signal conditioning (it is all one single assembly anyway isn't it?)
Cheers
Rich

polly_x

iTrader: (2)

www.ebay.de is your friend

or try http://vagparts.com/

thebigyin

in glasgow there is a place called tps which is a vag oe trade parts suppliers who are independent of the main dealers,do you have one of these anywhere near you? got me lots of bits for a tt i sold recently , at a good discount too

richm

http://vagparts.com/ £113 + vat

tabetha

I got all mine sorted now thanks, managed to swap some for some cossie bits so that kept the cost down, I only need to run EGT once mapped, but am still saving up for a few other bits.
Bloody cars you never have any money with them do you
Last week I bought a alloy rad(60mm), the week before a alloy RS500 intercooler(70mm), now added a few other bits about to order, like leads(HT) and a coilpack, but thinking about having scooby ends put on my magnecor, and using a scoob coilpack, mounted under inlet, less leads dangling around, I made a cam button(got mondy sensor) for the cam sensor, just need to chop up me dizzy when I put ecu on etc for oil pump feed.
Going to have one of the maps as flame thrower!!
tabetha