Hi, can anyone tell me how to set the throttle position sensor please?


Thanks

 

i no this might sound daft but on what car

without ant info on the motor people wont be able to help you

 

PF01 ONLY
Disconnect the ecu multiplug from the ecu itself and then with a multimeter:

Pin 1 of ecu connect your negative probe.
Pin 17 of ecu connect your positive probe.

Adjust the sensor until it is just open circuit and ensure it drops to a reading the moment the throttle is moved, but be certain it always goes open circuit with the throttle released.

PF09 ONLY
Plug the ecu multiplug back into the ecu and turn on the ignition.
Adjust the sensor to read <0.35volts at idle position.

 

you have either not checked on the other thread your started on stus forum! or just ignoring my answers! just like you did the other day!

i get the hint,,, i wont reply no more

 

i'll give you one of these Gareth

Save'd me writing it.

ps, 01 = 2wd, 09 = 4wd TPS.


unless he's talking about a RST?

 

http://www.fordrsforums.co.uk/viewtopic.php?f=1&t=855

he got a three door