pete mcrash

iTrader: (1)

i'm after bigger injectors as i'm going to max out my turbo (450ish) but at a later date i might get a t4 so would like something that would cope,dont want to go 8 injector and i DONT WANT SEIMENS either........what cc do i need.....cheers Pete........(weight to see how many people say seimens)......

NEIL A

iTrader: (6)

RC 1000 cc think MAD sell them ?
But have to ask why not seimens

Gary F

iTrader: (1)

I'd go Seimens

pete mcrash

iTrader: (1)

just had a look on Mike R's site...........he's got some big ones........ 750's, 1000's................what are these good for....????

Stavros

ive got 8 1600cc bosch ones here actually, ie identical fit to normal cossie injectors.
cost fuck all too, i bought 8 for about 125quid i think.

thats good for a fuckload more than 500bhp.

semen

Karl

Siemens 750cc.

capri-rs

rc 750 cc

Butch.

iTrader: (1)

why not siemens injectors then?

Si B

iTrader: (59)

Siemens

Got 72lb hr and 83lb/hr ones, both sets worked fine in my Cossie.

Why not Siemens then?

Si

pete mcrash

iTrader: (1)

.....comman as muck.................. ...some gobshite will answer that

Christian and Beccy

iTrader: (14)

My thats a good technical reason not to run good injectors!!

GARETH T

siemens make very good injectors,,, why the hell wouldnt you want to use them

stevieturbo

Understatement. The 60lb Siemens injectors are some of the best out there.

Karl

May I also add that 90% of engines I build are running Siemens injectors in one form or another!

Mark Shead

I use RC engineering ones 1000cc good for near 800hp I have run these on engines down to 400hp with no apparent downside or loses, but anything smaller I use siemens as I can get these easy also.

Mark

pete mcrash

iTrader: (1)

................nowt ta do with me........cheers for the replys

Si B

iTrader: (59)

Mark (or anyone else that knows), while you're on this subject, will my old Cossie Siemens (have 72 and 83lb/hr) injectors fit my Evo should I need them in the future?

Si

Mark Shead

Each end is slightly smaller they would need to be modifide, I have looked at the siemens in this way and they can be modded to fit.

Mark

COS 22

iTrader: (1)

cos ahmed does not like them

am i correct ??????????????????

JTECH James

iTrader: (13)

gearbox done then?

...here we go again, a week after you have more power you will be slagging the car off cos its bust again surely you need to sort a few other issues first....

is there a technical reason ahmed doesnt like these injectors then? or just cos he said so

pete mcrash

iTrader: (1)

jtech......................it's my car i'll do what the fuck i want............ as for the injectors....i've asked for a price on headwork,cams, said i dont want to go 8 injector (what other options are there) and was told they would sort it,but it wouldn't be seimens........i'm just asking about for prices aswell.........................p.s jtech.....u going to sell me ur box (cheap) now that urs has gone BANG...................

stevieturbo

If a tuner has issues with Siemens injectors....Id be inclined to take the car elsewhere if they think the injectors are the problem.

pete mcrash

iTrader: (1)

.................u do that.......i'll stick with Ahmed......whats the problem with a tuner useing injectors he feels comfortable with,not what other tuners use......................wtf........

JTECH James

iTrader: (13)

no i need it so my car will run 550bhp on the new engine thats under way.....and not break all the time.......like yours

im going to run 83lb siemens injectors...

paul16v

Why dont you ask ahmed what injectors to use then?

stevieturbo

hundreds of tuners around the world use them, and they perform superbly. Much better than plenty of other brands.

Ive yet to hear anyone say a bad word about them....well, this thread is a first.


Although no mention of what the problem is.

Each to their own of course though.

Nick.

Stick with Ahmed dad has always spoke highly of him

cossiegreg1

good reply

leecavturbo

switched to siemens here, better idle and at
a better afr than was achiveable on rochesters,
lots of duty left too,
a preference by my tuner and the whole
world it would seem

pete mcrash

iTrader: (1)

.........if u monkeys could read u'd discover i've allready asked......... ..............they'll sort it

pete mcrash

iTrader: (1)

thats the problem on this site.................tuner wars.....my handbags better than your's.................u sort ur car............

JTECH James

iTrader: (13)

you asked.....you sort yours then....

stevieturbo

I thought all the tuners said Siemens were great.....well...except one it seems

Where's the fight ?

pete mcrash

iTrader: (1)

......so before they became "the choice" what did everyone use..............this post is to find out what options there are......but obviously when i said i wanted other than seimens it's turned into the spanish inquisition............. ...............i dont fuckn care whats in my car as long as my tuner does the job............end off really

stevieturbo

These guys in the US have a massive range.

http://www.racetronix.com/

Or RC Engineering.

http://www.rceng.com/

Im using them at the minute....they work, but I dont like them....I dont have a huge choice though. A friend also had one go faulty.
But they have a massive range, and in general are very good.

I'll probably upgrade to some Siemens 83lb later in the year though.

pete mcrash

iTrader: (1)

cheers................

JTECH James

iTrader: (13)

ahmed might not like them either

Si B

iTrader: (59)

Many thanks Mark, that saves me selling these ones, then buying some more Evo ones a few months later when I go mad on the power

More pennies for the rest of the plan

Si

BigErn

Whats everyone bickering about, all he wants is other options and all you lot can do is quiz him and basically take the piss out of his reasoning.

What happened to people helping people on here???

Anyway Pete fuck them all Id use Siemens injectors.

Seriously though I know theres an american company that do Bosch fit injectors, Ill try to fid the link for you tomorrow mate as its on my desktop downstairs.

Jay,

iTrader: (4)

slow bosch ones pete unlike siemens