Is it worthwhile drilling holes in airbox ? (Saph cossie)
#41
Testing the future
Originally Posted by 4x4
Originally Posted by foreigneRS
Is it worthwhile drilling holes in airbox ?
not if you're just going to suck in hot air.
not if you're just going to suck in hot air.
personally, i would cut out the bottom of the box and a corresponding hole in the inner wing (with additional coarse filtration and water trapping measures) and use the high pressure air in the wheel arch to feed the panel filter with a large opening to that area from the front bumper
#42
Caraholic
iTrader: (3)
Originally Posted by Ryan
mike, do either of the carbon airbox lids you do for the 2wd base, take a t34 size hose? or is one standard t3 and the other t4?
Also, how about this to help spice up the engine bay?
#43
PassionFord Post Whore!!
Originally Posted by KSA-Cossie
Have you tried it yet m8.
#44
15K+ Super Poster!!
Join Date: May 2003
Location: Southampton
Posts: 18,589
Likes: 0
Received 0 Likes
on
0 Posts
mike, i did look on the website but didnt see those pictures.
yeah im sure they would help, wouldnt really help the bank balance though.
Give me a special price on splitter, lid, heatshield, and full cambelt cover pls
yeah im sure they would help, wouldnt really help the bank balance though.
Give me a special price on splitter, lid, heatshield, and full cambelt cover pls
#45
saff is working!!!...atm
iTrader: (1)
Join Date: May 2006
Location: fishburn sex shop...co.durham
Posts: 8,984
Likes: 0
Received 0 Likes
on
0 Posts
chop it to bits................i got an airbox off Dave (cos 22)...it was concours... .i even sent him pics after i chopped the whole front off it.................it even had back to black on the inside........
#46
Caraholic
iTrader: (3)
Originally Posted by Ryan
mike, i did look on the website but didnt see those pictures.
yeah im sure they would help, wouldnt really help the bank balance though.
Give me a special price on splitter, lid, heatshield, and full cambelt cover pls
yeah im sure they would help, wouldnt really help the bank balance though.
Give me a special price on splitter, lid, heatshield, and full cambelt cover pls
http://www.randbmotorsport.co.uk/sho...?ProductID=315
Lid:
http://www.randbmotorsport.co.uk/sho...?ProductID=143
Heatshield:
http://www.randbmotorsport.co.uk/sho...?ProductID=283
Cambelt cover:
http://www.randbmotorsport.co.uk/sho...?ProductID=103
You forgot something :
http://www.randbmotorsport.co.uk/sho...?ProductID=152
#47
Testing the future
Originally Posted by pete mcrash
chop it to bits................i got an airbox off Dave (cos 22)...it was concours... .i even sent him pics after i chopped the whole front off it.................it even had back to black on the inside........
#48
10K+ Poster!!
Originally Posted by Mike Rainbird
Originally Posted by 4x4
so rather than drilling holes some people have just cut that big trianlge shape of the side of the air box?
anyone tested it?
anyone tested it?
Only thing we notced after doing this was that alot of radiant heat was now being sucked in from the back o fthe rad.
We blocked up the orginal square inatke in the box and made a sheild to stop this and bonded it to the back of the head light..
#50
saff is working!!!...atm
iTrader: (1)
Join Date: May 2006
Location: fishburn sex shop...co.durham
Posts: 8,984
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by foreigneRS
Originally Posted by pete mcrash
chop it to bits................i got an airbox off Dave (cos 22)...it was concours... .i even sent him pics after i chopped the whole front off it.................it even had back to black on the inside........
Thread
Thread Starter
Forum
Replies
Last Post
155lee
Ford RS Turbo Parts for Sale
4
06-09-2016 11:10 AM