Rolling road setup today
#41
10K+ Poster!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by YoungDan
I've had both a live map, and a RR map and TBH not noticed a difference. (Both by top mappers, Stu and Kenny @MSD and by Steve Greenald of Race Engine calibration services)
Anyway, there is so me fucking horrible attitude in this post, how old are you?
I'd 150% say Rob isn't the misleading type, very nice chap.![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Anyway, there is so me fucking horrible attitude in this post, how old are you?
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
I'd 150% say Rob isn't the misleading type, very nice chap.
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Top bloke and although its done on the rollers its spot on....... well was till it broke a valve spring or something
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
I think the rolling road vs road tuning argument could go on forever but I can't see any gains from doing a NA engine on the road, the engine he done for me was mapped at full load @ 1300 rpm in 5th at one point so it was nice to see every last area being checked
#42
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
He doesn't stop until it's done..
My rolling road print out is timed at 23:03
Apparently as soon as mine was finished next one was going straight on for a long mapping session too!
My rolling road print out is timed at 23:03
Apparently as soon as mine was finished next one was going straight on for a long mapping session too!
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#45
10K+ Poster!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by YoungDan
He doesn't stop until it's done..
My rolling road print out is timed at 23:03
Apparently as soon as mine was finished next one was going straight on for a long mapping session too!![Top](https://passionford.com/forum/images/smilies/smile011.gif)
My rolling road print out is timed at 23:03
Apparently as soon as mine was finished next one was going straight on for a long mapping session too!
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
He wasn't happy with it till it was 110%, superb service, as soon as I arrived and saw that the burger van was open till the early hours I knew we were in for a long night
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#49
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: west sussex
Posts: 2,296
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Rob@SCC Performance
Originally Posted by B16 YBB
I specifically asked for a rolling road setup,so dont lie....fucking attitude you cunt,i was up 24 hours,drove 85 fucking miles,brought a mate who wanted to see a car on the rollers,as he was going to have his sorted soon as well,so wasted his time as well...and you havent fucking got rollers
It is now booked in with a proper tuner next week.
mark
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
It is now booked in with a proper tuner next week.
mark
Dont call me a liar
![Mad](https://passionford.com/forum/images/smilies/mad.gif)
You may think you did but i can assure you - you didnt !!
Certainly dont call me a cunt
![Mad](https://passionford.com/forum/images/smilies/mad.gif)
![Mad](https://passionford.com/forum/images/smilies/mad.gif)
Its pricks like you make me glad i didnt persue the dyno and stuck to sensible old MOT's where you get a much classier customer
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Kind Regards
Rob
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
You are now getting brave calling me a prick,why didnt you do it earlier when i showed my anger,instead of being a keyboard warrior..
i was ready to show my displeasure earlier but you sensibly disapeered,and its probaly for the best.
i have learnt a lesson with this,and its now going to a cosworth specialist.
For your little rant above,i will visit you again one day and let you do it to my face you little prick.
mark
#50
15K+ Super Poster!!
iTrader: (4)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
B16 YBB
Your the one thats a keyboard warrior prick this & cunt that &
@ you showing anger hard man
if you were that hard & you were that angry you had your place to do something about it when you seen the man instead of coming on here & trying to bring him down SORT YOURSELF OUT
Your the one thats a keyboard warrior prick this & cunt that &
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
#52
![Default](https://passionford.com/forum/images/icons/icon1.gif)
....if this customer was told he would get a RR tune where is it his fault
...Is this a way of getting business by lying?
Rob...did he ask for a RR tune and did you say YES?
Simple as.
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
Rob...did he ask for a RR tune and did you say YES?
Simple as.
#54
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: west sussex
Posts: 2,296
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by carlo
B16 YBB
Your the one thats a keyboard warrior prick this & cunt that &
@ you showing anger hard man
if you were that hard & you were that angry you had your place to do something about it when you seen the man instead of coming on here & trying to bring him down SORT YOURSELF OUT
Your the one thats a keyboard warrior prick this & cunt that &
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
regards mark
#56
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: west sussex
Posts: 2,296
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch_Dealer
....if this customer was told he would get a RR tune where is it his fault
...Is this a way of getting business by lying?
Rob...did he ask for a RR tune and did you say YES?
Simple as.
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
Rob...did he ask for a RR tune and did you say YES?
Simple as.
I know a few people are up his arse but do you really think i would drive that far for a rolling road setup and then not complain when no rolling road?
mark
#59
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: west sussex
Posts: 2,296
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch_Dealer
..just realised who the user is...and i know for a fact Mark B16 YBB is 100% genuine.
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
mark
#62
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by B16 YBB
Originally Posted by Bosch_Dealer
..just realised who the user is...and i know for a fact Mark B16 YBB is 100% genuine.
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
mark
It makes you look more of a prick. There was obviously a misunderstanding, and great, you've been working all night, maybe you should book the evening off next time.
Doesn't really excuse you to come on here to start calling everyone a cunt.
#64
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by B16 YBB
Originally Posted by YoungDan
Angry cunt arn't you. ![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
mark
I'd be a bit pissed off, I wouldn't start threatening people though.
#65
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: west sussex
Posts: 2,296
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by tony_turbo
did he not ask you what "electroonic " meant cos i havent a clue.
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
mark
#66
PassionFord Post Whore!!
Join Date: Aug 2004
Location: South Lincs Drives: Sierra Cosworth
Posts: 8,524
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by B16 YBB
It is now booked in with a proper tuner next week.
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
Originally Posted by B16 YBB
and its now going to a cosworth specialist.
![](https://passionford.com/forum/images/smilies/tantpis.gif)
#69
I've found that life I needed.. It's HERE!!
Join Date: Sep 2004
Location: Shepshed, Leics
Posts: 1,149
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
lol @ this! maybe if you had a better attitude you might get a bit furthur?
If you are as blunt on the phone as you are on here then no wonder there are misunderstandings!!!
If you are as blunt on the phone as you are on here then no wonder there are misunderstandings!!!
![](https://passionford.com/forum/images/smilies/smile073.gif)
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
#70
just finding my feet
![Default](https://passionford.com/forum/images/icons/icon1.gif)
who is this mark bloke as i seem to remember him posting about the plate,, but cant remember who you are
oh and i PERSONALLY think that it may have got confused with on the road set-up and rolling road set up
now i KNOW rob dont have a r/r but one of hes close mates can get a mobile one for him to use IF he needed to so i recon rob would have asked hes mate to sort it for him IF he was aware
rob wont LIE,,, you BOTH was mistaken to what you was expecting
threatening someone to kick there head in dont make you right OR solve the issue,,,, infact why would you wanna beat someone up for a mistake,, we all make them
hope you dont have road rage mate as round st albans way belive theres a few "geeks" who you may run into and mouth off to and get shot
theres always someone harder than you in life,,, so only fight IF YOU MUST
but then i guess its cause rob dont look a hard man,,, not sure you would have got away with it had steve still been working there though
oh and i PERSONALLY think that it may have got confused with on the road set-up and rolling road set up
now i KNOW rob dont have a r/r but one of hes close mates can get a mobile one for him to use IF he needed to so i recon rob would have asked hes mate to sort it for him IF he was aware
rob wont LIE,,, you BOTH was mistaken to what you was expecting
threatening someone to kick there head in dont make you right OR solve the issue,,,, infact why would you wanna beat someone up for a mistake,, we all make them
hope you dont have road rage mate as round st albans way belive theres a few "geeks" who you may run into and mouth off to and get shot
theres always someone harder than you in life,,, so only fight IF YOU MUST
but then i guess its cause rob dont look a hard man,,, not sure you would have got away with it had steve still been working there though
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#71
I've found that life I needed.. It's HERE!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Join Date: May 2003
Location: ST Albans Car Clinic
Posts: 1,285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by "B16 YBB
For your little rant above,i will visit you again one day and let you do it to my face you little prick.
mark
Is that a Threat ??
I'm Sure thats against PF Rules !!
2. Members Conduct.
In posting on the PassionFord forums, you agree that you will not use the Discussion Forum or any other part of our site to:
Register more than one username per member.
Upload, post or email any content that is unlawful, harmful, offensive, threatening, abusive, harassing, tortuous, defamatory, vulgar, obscene, sexually graphic, pornographic, libellous, invasive of another's privacy, hateful, or racially, ethnically or otherwise objectionable.
Upload, post or email any content that is repetitive, or irrelevant to the forums title.
Harm or threaten to harm minors or adults in any way.
Breach any applicable law or regulation.
Infringe any patent, trademark, trade secret, copyright, database right or other similar right of any party
Impersonate any person or identity, falsely state or otherwise misrepresent your affiliation with a person or entity or disguise the origin of any content.
Harass another person.
Collect or store personal data about other users.
Upload, post or e-mail any content that you do not have a right to transmit under any law or under contractual or fiduciary relationships.
Upload, post or email any content that infringes any intellectual property rights of any third party.
Upload, post or email and unsolicited or unauthorised advertising, promotional materials, 'junk mail', 'spam', 'chain letters', or any other form of solicitation.
Upload, post or email any content that contain computer viruses or any other computer code, or programs designed to interrupt, destroy or limit the functionality of any computer software, hardware, or telecommunications equipment
Violate any applicable national or international laws or regulations.
Advertise the sale or whereabouts of illegal bootleg material(such as copied DVDs, VCDs and computer software).
Partake in Persistent xenophobia, racism or any other form of personal abuse including sexism.
Partake in anything invasive of a person's privacy, including the posting of photographs without that person's permission.
#73
Professional Waffler
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Mitsy FQ
I have a rolling road and we use it in conjunction with road tuning but the cost can be quite high due to the time used
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#74
![Default](https://passionford.com/forum/images/icons/icon1.gif)
call it a day folks, it was a misunderstanding, i know Rob@SCC through my old job, he's a sound chap, i can understand whats happened, Mark called SCC to book a tune, Rob booked him in, it seems Mark should have made more of a point of making sure SCC had a r/r, Rob maybe should have listened more to what Mark was saying but Rob must answer countless calls each day & if Mark metioned a r/r tune right at the begining of the call it could have easily been misunderdtood!!!
If i was Mark i would be pissed off, if i was Rob i would be pissed off about upsetting a customer.
Mark, i'm sure you will be happy with Chris @ Torque, he knows his stuff
as for all the people slating Mark beause he wants a r/r tune, why??? its his car & his money he is spending, i can fuly understand he dosn't want some tuner ragging his pride & joy around there local roads.
maybe people can stop stirring, Mark can chill out & get his car tuned
as for slating SCC, it was a misunderstanding, he never even saw any of there work, which looks good to me (Oranoco's car are a prime example)
If i was Mark i would be pissed off, if i was Rob i would be pissed off about upsetting a customer.
Mark, i'm sure you will be happy with Chris @ Torque, he knows his stuff
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
as for all the people slating Mark beause he wants a r/r tune, why??? its his car & his money he is spending, i can fuly understand he dosn't want some tuner ragging his pride & joy around there local roads.
maybe people can stop stirring, Mark can chill out & get his car tuned
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
as for slating SCC, it was a misunderstanding, he never even saw any of there work, which looks good to me (Oranoco's car are a prime example)
#75
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by B16 YBB
do you really think i would drive that far for a rolling road setup and then not complain when no rolling road?
mark
mark
Seems pretty obvious to anyone with half a brain that it was some sort of misunderstanding/breakdown in communication.
It's unfortunate, but it happens. What more can Rob do?
#76
10K+ Poster!!
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch_Dealer
Mark.....dont bother...this place is full of arse lickers....you wont win..i know you are telling the truth and i am shocked to say the least....
Now who is arse licking?, the above qoute is from probably the biggest fucking monkey on this site and who chats pure shit
Luciano
#78
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by charlie luciano
Originally Posted by Bosch_Dealer
Mark.....dont bother...this place is full of arse lickers....you wont win..i know you are telling the truth and i am shocked to say the least....
Now who is arse licking?, the above qoute is from probably the biggest fucking monkey on this site and who chats pure shit
Luciano
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#79
BANNED
BANNED
Join Date: Jul 2003
Location: Surrey BUT IF UR A FIT WOMEN
Posts: 4,185
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I am bored
as said before how the car is set up and by whom is upo to the owner as long as the job is does asap and as good as can be
I wont use SCC again as stated i asked them to check phase sensor 1ST
they didnt and cost hours of EXTRA UNEEDED HOURS TO THE BILL £450 for a £20 part rob stick with the mot sure 10p hole and a £300 fix it will keep you making enough money but not from me
learnt £400 extra later !!!
as said before how the car is set up and by whom is upo to the owner as long as the job is does asap and as good as can be
I wont use SCC again as stated i asked them to check phase sensor 1ST
they didnt and cost hours of EXTRA UNEEDED HOURS TO THE BILL £450 for a £20 part rob stick with the mot sure 10p hole and a £300 fix it will keep you making enough money but not from me
learnt £400 extra later !!!
#80
I've found that life I needed.. It's HERE!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Join Date: May 2003
Location: ST Albans Car Clinic
Posts: 1,285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by RS500/364
I am bored
as said before how the car is set up and by whom is upo to the owner as long as the job is does asap and as good as can be
I wont use SCC again as stated i asked them to check phase sensor 1ST
they didnt and cost hours of EXTRA UNEEDED HOURS TO THE BILL £450 for a £20 part rob stick with the mot sure 10p hole and a £300 fix it will keep you making enough money but not from me
learnt £400 extra later !!!
as said before how the car is set up and by whom is upo to the owner as long as the job is does asap and as good as can be
I wont use SCC again as stated i asked them to check phase sensor 1ST
they didnt and cost hours of EXTRA UNEEDED HOURS TO THE BILL £450 for a £20 part rob stick with the mot sure 10p hole and a £300 fix it will keep you making enough money but not from me
learnt £400 extra later !!!
Not a job i recall.........