T34's covering old ground
#41
I've found that life I needed.. It's HERE!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by JTECHSAFF
if i had to chose a new turbo i would not get a roller bearing tyoe ,because as far as i understand, if they go wrong ,its basicly disposable and very expensive to replace, can fail because of even slightly dirty oil ,where a standard type will still be ok,this means changing oil even more often
and the bearing carriers are made of plastic, and can melt ![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
motors reckons a lot of problems with gt turbo's stem from too much oil
being pushed thru them,and runs restrictors in the oil lines.
This also means better engine oil pressure.
puddy
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Russ Payne
Ford Sierra/Sapphire/RS500 Cosworth
1
25-09-2015 08:29 PM