Who saw them 18 inch escort cossy wheels at ford fair??
06-08-2007, 09:16 AM
#124
Advanced PassionFord User
Originally Posted by maxest
Apparently the ones pictured are et25,, they are also doing some et15 which there hoping will clear big brakes
Stunning wheels
Stunning wheels
they do look good though
would still like some new oz mag rally style ones with the correct offset
06-08-2007, 10:25 AM
#127
PassionFord Post Whore!!
I thought they looked really good.
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
06-08-2007, 11:23 AM
#129
PassionFord Post Whore!!
Join Date: Aug 2005
Location: .
Posts: 5,831
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by St3V3_C
I thought they looked really good.
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
. If you like the wheels, get them mate
06-08-2007, 12:10 PM
#131
PassionFord Post Whore!!
Originally Posted by PT
Originally Posted by St3V3_C
I thought they looked really good.
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
. If you like the wheels, get them mate
06-08-2007, 12:13 PM
#132
STOP!... Carry on
Join Date: Dec 2006
Location: Derbyshire
Posts: 2,200
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by St3V3_C
Originally Posted by PT
Originally Posted by St3V3_C
I thought they looked really good.
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
One thing did bother me though, you'll be spending near on Ł2k for a set of wheels that 90% of the people looking at it probably wouldn't notice.
I'm not sure if I like that...
. If you like the wheels, get them mate
06-08-2007, 12:59 PM
#134
PassionFord Post Whore!!
Originally Posted by K3V HA
Originally Posted by Stavros
Looks awesome tho! I swear ive seen that somewhere before now i see that...
Looks like there a little less dish than the originals tho?
06-08-2007, 01:18 PM
#136
PassionFord Post Whore!!
Originally Posted by M.A.D.RST
Originally Posted by StickerPaul
https://passionford.com/forum/viewtopic.php?t=284470
Details are in the bottom pic.
Details are in the bottom pic.
06-08-2007, 06:27 PM
#140
PassionFord Post Troll
Join Date: Jul 2003
Location: yorkshire
Posts: 3,392
Likes: 0
Received 0 Likes
on
0 Posts
Spoke to him today about ordering some and he's producing some ET15's which should clear AP's.
The ones pictured are ET25 as OE wheels.
Cant wait till he calls me back
Do love my ronnies tho, which may become rare again
The ones pictured are ET25 as OE wheels.
Cant wait till he calls me back
Do love my ronnies tho, which may become rare again
06-08-2007, 06:49 PM
#141
S1 Database Editor
Really like the look of those.
Gonna be the next rim-overkill tho I feel. At least the Esc Cos comes in more than one colour tho to mix it up a bit and create a different look.
Gonna be the next rim-overkill tho I feel. At least the Esc Cos comes in more than one colour tho to mix it up a bit and create a different look.
07-08-2007, 03:38 PM
#145
PassionFord Post Troll
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Kettering
Posts: 2,987
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by COMEDY DAN
That certainly looks the boy.
I bet the guy gets 50 orders before christmas, good luck to him.
Well spotted ginge, Oh, I mean Butch................
I bet the guy gets 50 orders before christmas, good luck to him.
Well spotted ginge, Oh, I mean Butch................
08-08-2007, 06:31 AM
#148
PassionFord Post Troll
Join Date: Sep 2003
Location: next to pc
Posts: 2,596
Likes: 0
Received 0 Likes
on
0 Posts
redrsmk5 wrote:
Matcos spoke to him at ford fair and he wasnt sure if they would clear AP's. TBH that would have been top of my list on the drawing board stage. What good are they if they wont fit over AP's ,yeah nice and very very different but to not ensure that they will clear AP's after what i can only presume will have been a fair bit of expense on his behalf to me seems like a bit of a schoolboy error????
How many of you guys would buy these wheels even if it meant taking your AP's off and going back to standard brakes ?
Thats why i was going to use an old style mo to start with so that 380mm brakes with 6 pot ap`s would fit lol, also hope he has got them tested and aproved as if anyone has any problems with them or crashes ect then he could end up in prison or with a very very big pay out, as this is what stopped me from going any more in to it, its allright to make a set for yourself but if you start to sell them, then it becomes a very different thing all together.
Still they look good, would have liked to see them fill the arch a bit more but fare play to him and i hope all goes well
Matcos spoke to him at ford fair and he wasnt sure if they would clear AP's. TBH that would have been top of my list on the drawing board stage. What good are they if they wont fit over AP's ,yeah nice and very very different but to not ensure that they will clear AP's after what i can only presume will have been a fair bit of expense on his behalf to me seems like a bit of a schoolboy error????
How many of you guys would buy these wheels even if it meant taking your AP's off and going back to standard brakes ?
Thats why i was going to use an old style mo to start with so that 380mm brakes with 6 pot ap`s would fit lol, also hope he has got them tested and aproved as if anyone has any problems with them or crashes ect then he could end up in prison or with a very very big pay out, as this is what stopped me from going any more in to it, its allright to make a set for yourself but if you start to sell them, then it becomes a very different thing all together.
Still they look good, would have liked to see them fill the arch a bit more but fare play to him and i hope all goes well
08-08-2007, 07:13 AM
#149
PassionFord Post Troll
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Kettering
Posts: 2,987
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by staffi
Butch, sorry for not recognizing you mate driving home 
i was elsewhere.. getting rage.. 
i was elsewhere.. getting rage..
08-08-2007, 08:41 AM
#150
Originally Posted by bigpower
Spoke to him today about ordering some and he's producing some ET15's which should clear AP's.
The ones pictured are ET25 as OE wheels.
Cant wait till he calls me back
Do love my ronnies tho, which may become rare again
The ones pictured are ET25 as OE wheels.
Cant wait till he calls me back
Do love my ronnies tho, which may become rare again
.Would even have a set for mine if they cleared the brakes
.(Obviously providing the issues Duncan mentioned were clarified
).
08-08-2007, 08:43 AM
#151
20K+ Super Poster.
iTrader: (1)
Originally Posted by Butch.
Originally Posted by staffi
Butch, sorry for not recognizing you mate driving home i was elsewhere.. getting rage..
i was elsewhere.. getting rage.. Will do mate..................
08-08-2007, 09:07 AM
#152
I've found that life I needed.. It's HERE!!
Join Date: May 2004
Location: ireland
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
i saw them and couldnt believe it, they look absolutly fantastic and i wouldnt be bothered about tiny nit picking details like the dish or filling the arches. they fill the archs a lot better than a load of other flat face wheels i see on escos'.
the one problem about them is that after staring at the for about ten minutes and groveling, now all the original 16inch versions look small and wrong in my eyes
my sierras fucked
i cant wait to see them on a saff and a 3dr, fair play to the lad who done em, hes onto a winner
the one problem about them is that after staring at the for about ten minutes and groveling, now all the original 16inch versions look small and wrong in my eyes
my sierras fucked
i cant wait to see them on a saff and a 3dr, fair play to the lad who done em,
hes onto a winner
08-08-2007, 02:16 PM
#153
Too many posts.. I need a life!!
Join Date: May 2003
Location: London
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by alanfordtw-15
i cant wait to see them on a saff and a 3dr, fair play to the lad who done em, hes onto a winner
hes onto a winner
08-08-2007, 08:40 PM
#155
PassionFord Post Whore!!
Such a subtle advert / display he did, but sooooo much attention, on RSOC too.
Fair play to the guy
Fair play to the guy
08-08-2007, 08:59 PM
#156
Professional Waffler
the new best wheel for an escos imo. TBH i love the std 16's but thought they were too small....someones gone and 90% perfected them 100% would have been more dished
100% would have been more dished
Thread
Thread Starter
Forum
Replies
Last Post
Versus_Creations
Pictures, video & Photoshop Forum
24
05-08-2015 09:32 PM
