jonesymk2

iTrader: (2)

anybody got any rc cars,heres pics of my 2,the petrol car is a serpent impact with a kyosho gs11 engine in it but the engine is knackered so just waiting for a kyosho gs12 engine to turn up that i got off ebay the electric car is a yokomo yr-4 II,it has got carbon fibre chassis,carbon suspension brackets front and back,carbon fibre diff top covers and carbon fibre top chassis/impact absorber,its also got a sports motor aswell and the electronic spped controller has even got abs lol

Oranoco

Here's mine, nothing fancy. Have added a full ballrace kit and 18T motor.



My brother has a good collection including several cars and a helicopter which is proving really hard to fly

RichieST

iTrader: (2)

nice one mate, i had the same speed controller

i did have a nitro one too, but spent more of its time broken so i got rid of it!!

I want to get back into it again sometime tho

rich

Miller 3

iTrader: (4)

Few of mine

Modified Schumacher menace GTR running a .28 engine should be good for 100mph

jonesymk2

iTrader: (2)

i would love a decent nitro car but just havnt got the money really but will hopefully get 1 sometime next year,i wouldnt mind fitting a bit bigger engine into it but its hardly got any space round the engine so wouldnt be worth the trouble,100mph thats going to be naughty,the motor in the electric car is a 12turn double wind,it can be adjusted for spped or endurance,im going to find some drift tyres for it and hav a play around with it out the front of my house

jonesymk2

iTrader: (2)

i like the look of that

Miller 3

iTrader: (4)

Check this out' Click the link for the record.
http://www.racers-haven.com/world_record_run.php

RickyLee53

I've got a couple of proper 1's i'l try and get some pic's.

jonesymk2

iTrader: (2)

thats seriously quick and its from an electric car aswell

jonesymk2

iTrader: (2)

ok cheers mate

Miller 3

iTrader: (4)

Did you see the unofficial record of 160mph

jonesymk2

iTrader: (2)

didnt see any vid clips but had a little read about it yeh,stupidly quick

KW-rscos

Heres mine, It s Schumacher SST Sport, full carbon chassis, cost me a bomb back in the day, used to race it before I came to swansea, I have races it on the touring on tarmac, but its set for rallying which was the last thing I raced in at Tiverton.

Nick.

With a few aerodynamic mods, gearing and a more powerful battery.. will see 100mph quite easily.. and it will get there faster than a nitro car easily

Also should be good for 13-15second 1/4 passes

Miller 3

iTrader: (4)

Nick still about.. Not seen you on Schueee in a while lol

RichieST

iTrader: (2)

thats a serious bit of kit..... you selling it???

Nick.

Im back on there... the legend has returned

CheeRS... not selling it though only just spent Ł250 on electrics

RichieST

iTrader: (2)

crikey mo....

can you put up the spec of it??

rich

Jim Green

Here's a couple of mine......a 1/8th On Road Nitro Powered....(The Formual 1 or RC Cars).

VERY DAMNED fast.


And Kyosho Evolva

Nick.

Basically

Surikarn Features:
• 39 Tooth Pulley (Ball Differential)
• 39 Tooth Pulley (One-way)
• Aluminum Diff Cup Joint Set
• Diff Cup Joint Adapter (2pcs)
• Heavy Duty Front Shock Tower 3.5mm
• Heavy Duty Rear Shock Tower 3.5mm
• Front Bulkhead Set (blue)
• Rear Bulkhead Set (blue)
• Motor Mount (blue)
• Middle Block R (blue)
• Upper Bulkhead Set (blue)
• Bearing Holder (blue)
• Pivot Block FR (blue)
• Pivot Block RF (blue)
• Steering Arm Set (blue)
• One-way Holder (blue)
• Spur Gear Hub (blue)
• Belt Tensioner Mount (blue)
• Shock End Ball (blue/4pcs)
• Cylinder Upper Cap (blue/2pcs)
• Cylinder Lower Cap (blue/2pcs)
• Titanium Turnbuckle M3x24mm (blue/2pcs)
• Titanium Turnbuckle M3x34mm (blue/2pcs)
• Aluminum Washer 3x6x0.75mm (blue/10pcs)
• Aluminum Washer 3x6x2.0mm (blue/10pcs)
• Servo Saver Set (blue)
• Wheel Nut M4 (blue/5pcs)
• Pivot Block (Front or Rear/2.5 Degrees/Aluminum/blue)
• Pivot Block (Front or Rear/3.0 Degrees/Aluminum/blue)
• Ball Set For Sway Bar (blue/4pcs)
• Solid Axle (1 Piece Type/blue)
• Aluminum Servo Mount Set (blue)
• Aluminum Spring Mount (blue/4pcs)
• 44mm Aluminum Universal Drive Shaft (blue/1pc) ++

Novak GTB Brushless/Brushed ESC
Novak 3.5 Velociti brushless motor
Team Orion 7.4v 4800 li-po
Futaba 3050 servo (nothing special)
Sanwa gemini 2 radio gear
Titanium front drive shafts
cs-22 tyres

Dangerous Malcolm..

I used to have a Thunder Tiger TS4N but I was limited to where I could mess around with it. So I've now got this and this to play with instead.

Classic Tamiya's and they're nice and cheap.

Miller 3

iTrader: (4)

With rubber tyres ay Nick

FOAMS ROCK.................

Nick.

Yep rubbers... will change to foams when I do some top speed runs down donington straight

jonesymk2

iTrader: (2)

i keep looking at the classic tamiyas on ebay,would love a midnight pumpkin and the lunch box aswell as i always wanted 1 when i was younger and there quite cheap off of ebay aswell just got to wait to get it from hong kong or something

TrevCannon

My aZZZZZ 100mph will it lol!!!

Plus that looks like a complete piece of shit! nice shell!

Nick.

It stands a far better chance than your fusion..

+++ check out the custom gearing from the engine.. + the extra torque of the .28 to pull it through the lower overall ratio in each gear.. it will easily see 100 on a long enough straight

purple_fiesta

Mine, Gears fooked up a while back and I havent bothered with it since!

wirralphil

i have a Xtm xt2 for the 1/8 scale off roading, and a 1/10 Cen gx 01 for the road with a 2 speed gear kit and soon to be a 24.7 engine off the xtm for fun.

RobS

iTrader: (3)

My Cen truck, 5.5hp







my savage



AE MGT



got 2 cars aswell, one petrol one elec, trucks more fun tbh

RichieST

iTrader: (2)

i've just cum




So then guys, you've made me want another one now What would you suggest?? Nitro is just too much buggering about, so probably electric, would like a buggy/truck for off road, and i want it to go like fook

Suggestions please

xr2i-carl

mine, got an 1995 dtm alfa somewhere i had from new!!

pani_k

iTrader: (1)

HPI R40 Currently running a Vega V12, CVEC Pipe and hopups which I cant be bothered to list right now since theres too many lol. I also have a novarossi engine with it and two other pipes. Shell is a Pennzoil Skyline GT-R. Sitting quite low there



Miller, havent seen your car in a long time. Hows it going?

gus

iTrader: (1)

Nick.

Id reccomend one of these
http://www.teamlosi.com/Products/Def...rodID=LOSA0015

+

http://www.teamnovak.com/products/br...tem/index.html (6.5 system)

+

http://www.apexmodels.co.uk/product-...ories&id=11058

depending on gearing that will be good for 60mph

vroomtshh

If you're gonna recommend he go for a losi, he would be better with a xx-4.

Nick.

I thought that a little too expensive and good to just bash with

jonesymk2

iTrader: (2)

some nice ones there

coswurv

iTrader: (8)

Here's a couple of pics of mine, the truck is an absolute beast powered by a o.s max race engine and check the K@N boys and their toys !!




and before you say anything yeah its covered in overspray and needs a good clean

tsutton

You should come over to http://www.msuk-forum.co.uk

nilrem

is that the Tamyia model?? if it is i hav e that one!!! they arew well fun!!!

maight get it out soon now!!