should i sell or go for more power?
#1
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
should i sell or go for more power?
right,
should i go for more power, or sell the rs500, its a hard one as i had had it for quite a while and allready spent loads on it, even advertised it on the rs owners club forum, but dont know if i could let it go.
i did 30 miles in it last year, which is just a waist,
whots a basic spec for say 650/700 bhp, could this be done on 2 litres,
am i looking at a gt40 turbo? remote waistagte, bigger injectores maybe T6 pectal or another ecu,
any tuners who would be up for the job?
answers on a post card please
should i go for more power, or sell the rs500, its a hard one as i had had it for quite a while and allready spent loads on it, even advertised it on the rs owners club forum, but dont know if i could let it go.
i did 30 miles in it last year, which is just a waist,
whots a basic spec for say 650/700 bhp, could this be done on 2 litres,
am i looking at a gt40 turbo? remote waistagte, bigger injectores maybe T6 pectal or another ecu,
any tuners who would be up for the job?
answers on a post card please
#5
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
yer i normally use steve scott,
not sure if he has done anything that powerfull yet, might give him a bell.
where about in the country is julian godfrey? allways heard good stuff about his engines. any contact, again may be worth giving him a call.
not sure if he has done anything that powerfull yet, might give him a bell.
where about in the country is julian godfrey? allways heard good stuff about his engines. any contact, again may be worth giving him a call.
#6
I've found that life I needed.. It's HERE!!
Quote from the Reyland website:
"Reyland Motorsport can build/rebuild Cosworth YB engines to ANY specification - standard, mild, and wild! - and would be happy to quote each person for their specific requirements. E.g. 605hp engine can be produced for less than most other tuners charge for a 520hp t4 8 inj unit.
£P.O.A"
"Reyland Motorsport can build/rebuild Cosworth YB engines to ANY specification - standard, mild, and wild! - and would be happy to quote each person for their specific requirements. E.g. 605hp engine can be produced for less than most other tuners charge for a 520hp t4 8 inj unit.
£P.O.A"
Trending Topics
#8
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
yer got no problems with martin, only the distance! he is so very far away from me,
travelling to steve scott is bad enough 120 miles each way,
martin is in blackpool? or somewhere up there.
travelling to steve scott is bad enough 120 miles each way,
martin is in blackpool? or somewhere up there.
#9
10K+ Poster!!
Join Date: May 2003
Location: not far away
Posts: 10,011
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martinrs500labatts
yer i normally use steve scott,
not sure if he has done anything that powerfull yet, might give him a bell.
where about in the country is julian godfrey? allways heard good stuff about his engines. any contact, again may be worth giving him a call.
not sure if he has done anything that powerfull yet, might give him a bell.
where about in the country is julian godfrey? allways heard good stuff about his engines. any contact, again may be worth giving him a call.
he is based in heathfield which is near uckfield in east sussex, not near you though im affraid.
#13
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
o well new it was somewhere up there!
still a long way from me.
if i do go down this road i will not rull him out, and give him a ring for a chat,
still a long way from me.
if i do go down this road i will not rull him out, and give him a ring for a chat,
#15
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
i was talking to the guy from turbo dynamics in dorset, and they seam to know there stuff,
1 size of turbo for 2 litre engine to make this sort of power.
2 size of waistagte.
3 where to get the strongest exaust manofold for above.
4 live map or dyno?
5 four large injectors or eight smaller ones.
6 who to build the beast?
1 size of turbo for 2 litre engine to make this sort of power.
2 size of waistagte.
3 where to get the strongest exaust manofold for above.
4 live map or dyno?
5 four large injectors or eight smaller ones.
6 who to build the beast?
#17
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
i will have to the car mags out and read the specs on some of the norwegen cars,
are they to be beleived, as there 2 litre engines seam to make the big horses.
mail order big power
are they to be beleived, as there 2 litre engines seam to make the big horses.
mail order big power
#18
10K+ Poster!!
Join Date: May 2003
Location: not far away
Posts: 10,011
Likes: 0
Received 0 Likes
on
0 Posts
julian normally has 1 or 2 600bhp+ engines in his workshop somewere lol
go down there a week before a rallyx event and you will see dermot carnegies focus there as he does all the work on it.
go down there a week before a rallyx event and you will see dermot carnegies focus there as he does all the work on it.
#19
Originally Posted by mr godfreys website
1991 * Ford Cosworth RS200 BDT 'E' engine producing 654 BHP with torque figures off the guage and that using just 1.7 bar boost. Winning the British Grand Prix. Owned by Pat DORAN
1997 * Built Wayne SAUNDERS Ford Probe BDT 'E' Evolution engine producing 825 BHP at 8000 rpm. 660lbs of torque. 0 to 135 mph in 5.3 seconds. Took world record at 172mph after 7.7 seconds.
2000 * Wayne SAUNDERS in his new Ford Focus sets NEW WORLD RECORD in his new BDT 'E' Evolution engine rebuild. Producing a staggering 0-177mph in 7.53 seconds. THE WORLDS FASTEST FOUR CYLINDER CAR!!!
* Dieter KNUTTER won German Hillclimb champion in his RS200 Evolution 2.3 litre We rebuilt the car, engine and transmission producing 320 km/h.
* Design and built Dermot CARNEGIE new Ford Focus Cosworth
2002 * Andy GRANT YB Cosworth Engine producing 680BHP
* John TENENHAM Ford Probe Dragster with improved engine by us provides 780BHP, 60BHP more than the 2001 version
#20
has to be either Reyland or Godfrey
Martins Car has proved itself time and time again with proven timed performance
and Julian Godfreys portfolio speaks for its self his rallyx engines ie Carnegie and Doran have been 1,2 in the rally x championship for what the last 3 years in a row See simon T's post the man is a fecking legend
Martins Car has proved itself time and time again with proven timed performance
and Julian Godfreys portfolio speaks for its self his rallyx engines ie Carnegie and Doran have been 1,2 in the rally x championship for what the last 3 years in a row See simon T's post the man is a fecking legend
#22
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
just looked on his site, as it is impresive.
whot would be nice is a BDT EVO engine, how much is one of these little babys.
170 mph in 7 seconds, worlds fastest four cylinder engines.
whot would be nice is a BDT EVO engine, how much is one of these little babys.
170 mph in 7 seconds, worlds fastest four cylinder engines.
#24
PassionFord Post Whore!!
Join Date: May 2003
Location: Kent
Posts: 5,719
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martinrs500labatts
whot would be nice is a BDT EVO engine, how much is one of these little babys.
#25
10K+ Poster!!
Join Date: May 2003
Location: not far away
Posts: 10,011
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AndyRST
Originally Posted by martinrs500labatts
whot would be nice is a BDT EVO engine, how much is one of these little babys.
#30
PassionFord Post Whore!!
Join Date: May 2003
Location: Kent
Posts: 5,719
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Benn 304R
Originally Posted by AndyRST
Originally Posted by martinrs500labatts
whot would be nice is a BDT EVO engine, how much is one of these little babys.
#33
PassionFord Post Whore!!
Join Date: May 2003
Location: Kent
Posts: 5,719
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Benn 304R
pmsl @ Andy, I know Julian isnt the cheapest but he wouldnt charge you 90k for a 800bhp bdt evo engine
I bet Julian would want the best part of £20K tho ???
#34
Advanced PassionFord User
Thread Starter
Join Date: May 2003
Location: hampshire
Posts: 1,808
Likes: 0
Received 0 Likes
on
0 Posts
i can buy a genuine rs200 evo for 80k
i know because i have been offerd one in the past.
the engines are not cheap, but they do have a lot of power in them.
p.s also seen new rs200 engine in the crate for 6k only 280 bhp
i know because i have been offerd one in the past.
the engines are not cheap, but they do have a lot of power in them.
p.s also seen new rs200 engine in the crate for 6k only 280 bhp
#35
10K+ Poster!!
Join Date: May 2003
Location: not far away
Posts: 10,011
Likes: 0
Received 0 Likes
on
0 Posts
I bet Julian would want the best part of £20K tho ???
got to find an engine thats for sale first lol
Is that how much them race replica RS500's are worth
#38
I've found that life I needed.. It's HERE!!
Join Date: Apr 2004
Location: wirral
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AndyRST
Originally Posted by Benn 304R
pmsl @ Andy, I know Julian isnt the cheapest but he wouldnt charge you 90k for a 800bhp bdt evo engine
#39
PassionFord Post Whore!!
Join Date: May 2003
Location: Kent
Posts: 5,719
Likes: 0
Received 0 Likes
on
0 Posts
[quote="Benn 304R"]
Holy poooop man, i missed that bit ........... £95K
Big up Martin, i couldnt think of a better way to spend £95K
look above under the pics he posted
Big up Martin, i couldnt think of a better way to spend £95K
#40
PassionFord Post Whore!!
Join Date: May 2003
Location: Kent
Posts: 5,719
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AJ Escos
Originally Posted by AndyRST
Originally Posted by Benn 304R
pmsl @ Andy, I know Julian isnt the cheapest but he wouldnt charge you 90k for a 800bhp bdt evo engine