Roosie

iTrader: (8)

so common what do u lot reckon im looking at in labour to do the welding and brake lines?

Roosie

iTrader: (8)

even thinking of just using it for track if its that much of issue

dovboy

i will need a bit welding on mine this year too,the old chasis leg

can you still buy these?

Fudgey

iTrader: (4)

brake pipes are fuck all and the sills aint too bad a job to do.


but id still break it and buy and MR2 turbo

Roosie

iTrader: (8)

im going to start by buying some goodridge hose

dojj

iTrader: (3)

when you say the inner sills, what do you mean?

on the estate both sills had gone to the extent that there was nothing holding the floorpan to the sills
it took me a month of welding and cutting and grinding to sort that out, and seeing as it was the inner sill, the outer sill and the bit in the middle of the sill as well as the floorpan joint, there was a hell of a lot of ,etalwork needed (wchih is why my leccy bill was Ł600 that quater )

get braided hose for the pipes and do them all in one go

as for the abs thing, sensors are almost always the cause of them

Roosie

iTrader: (8)

tbh mate i havent had a good look yet!

can you get braided hoses all the way through or is it only for the parts near calipers?

dojj

iTrader: (3)

i've got braided all the way on the rear of the estate
only cost me Ł3 more than a single pipe would be too

i think there is something baout running braided through the car though

Roosie

iTrader: (8)

if u could find out were i can get a full praided from would be appreciated.

just bought whole goodridge kit for front and back today

dave green

Sorry mate, must have got you mixed up with someone else,


Dave

dojj

iTrader: (3)

it's a long drive but i have never been let down by http://www.thinkauto.com/

but you really need to go there, with measurements of what you want (make sure you've got the right sizes of the fittings and angles and stuf too) and they make thm up on the spot

go with a few quid mind as they do charge, but i got an 9 foot long 1/8 fitting oil pipe with ends on and everything for Ł11
just rememebr to tell them what sort of pipe you are after, and they don't recommend braided lines for road use, like everyone else for some reason

frosty

fuck all that m8...bring it 2 us, soon sort that drop in the ocean out....piece a piss....