Mods for 250 bhp on a RST
06-09-2004, 06:46 AM
#2
PassionFord Regular
Join Date: May 2004
Location: great yarmouth
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
you would need an unlimited boost chip
low compression pistons
uprated head and cam
probably a stage 3 hybrid
big intercooler
decent exhaust
and about 24 to 26 psi i would think
low compression pistons
uprated head and cam
probably a stage 3 hybrid
big intercooler
decent exhaust
and about 24 to 26 psi i would think
06-09-2004, 09:42 AM
#5
www.ctuceilings.co.uk
Join Date: May 2003
Location: Kent
Posts: 9,370
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by turbo stealth
you would need an unlimited boost chip
low compression pistons
uprated head and cam
probably a stage 3 hybrid
big intercooler
decent exhaust
and about 24 to 26 psi i would think
low compression pistons
uprated head and cam
probably a stage 3 hybrid
big intercooler
decent exhaust
and about 24 to 26 psi i would think
06-09-2004, 10:20 AM
#7
PassionFord Post Troll
Join Date: May 2003
Location: Nr Crewe, Cheshire
Posts: 3,225
Likes: 0
Received 0 Likes
on
0 Posts
IMO 250Bhp (@fly) on a 1.6 RST can be achieved this way (while still retaining some reliability 
)
7.6:1 compression ratio using either accralites, mahles or similar
At least new standard rods (although 250Bhp IMO is on the limit of standard rods!)
Pref A.R.P rod bolts (although standard will 'probably' be ok.
a 'stage 3' turbo (will also be on limit at arround 250 Bhp)
A stage 3 BVH (good for over 300 Bhp)
piper 285t cam
nice big GRS, Radtec, Pace or similar intercooler
A custom map,
Ke fueling mod and/or 5th injector
Other incidentals such as samcos, k&N, decent exhaust, and finally a 'box to take it all!
Arround 25-27Psi should see 250Bhp at the fly on a 1.6
)7.6:1 compression ratio using either accralites, mahles or similar
At least new standard rods (although 250Bhp IMO is on the limit of standard rods!)
Pref A.R.P rod bolts (although standard will 'probably'
be ok.a 'stage 3' turbo (will also be on limit at arround 250 Bhp)
A stage 3 BVH (good for over 300 Bhp)
piper 285t cam
nice big GRS, Radtec, Pace or similar intercooler
A custom map,
Ke fueling mod and/or 5th injector
Other incidentals such as samcos, k&N, decent exhaust, and finally a 'box to take it all!
Arround 25-27Psi should see 250Bhp at the fly on a 1.6
Trending Topics
06-09-2004, 10:43 AM
#8
Professional Waffler
Mine made 248bhp and spec is
Low comp
ARP bolts
Lightened & balanced
Stage 2 cylinder head
Kent CVH 35 cam & vernier
Stage 2 Hybrid turbo
Pace intercooler (big one)
Water injection
5th injector
25psi
Low comp
ARP bolts
Lightened & balanced
Stage 2 cylinder head
Kent CVH 35 cam & vernier
Stage 2 Hybrid turbo
Pace intercooler (big one)
Water injection
5th injector
25psi
06-09-2004, 09:52 PM
#14
PassionFord Post Troll
Join Date: Jun 2003
Location: Finland
Posts: 2,866
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Thrush
Yeah thats pretty much it, but make sure you have a decent (as in non-restrictive) exhaust and some shit hot plugs too
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM