Doug

Is there any point in trying to improve on the focus chassis by fully space framing the front rear and floor sections or stick with the origional set up ?
My plan is to build a 2WD focus cosworth mainly for track thru out this year

Any input would be great I have a shell already for disection but would like to hear coments before i get the grinder out !


Regards Doug .

dave cos4x4

iTrader: (5)

thought the focus was pretty strong from the off Doug.

think you need to speak to Scotty, see what he has to say.

Doug

Good idea to be honest the chassis is pretty strong ridgid and superb on handling but im wondering if i can improve via space frame i.e adjustment of camber caster to maximum values i.e wider track slightly longer wheel base with space frame ?


Regards Doug .

The DIVA

iTrader: (3)

Keep it simple Doug,have a look at one of Scottys and you`ll be amazed how much of the original metal is untouched...

Doug

Thanks Diva ive heared he does minimal work spose I could just send him the shell to modify ?


Regards Doug

The DIVA

iTrader: (3)

After seeing one,i would....

He is very reasonable too,by the time you have put all the hours in the Scotty one would be a cost effective idea...