The Clive the cossie saga continues!!!
#1
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Thread Starter
Join Date: Oct 2003
Location: All over the friggin place!!!
Posts: 18,685
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well as most of you know, on my way back from the Bristol meet last month, my head gasket gave way!!
After inspection at SCC it was discovered that my head had warped, hence needed replacing!!
The top man Paul at North Yorks Spares sent over a new head to SCC so they could get it reattached to clives engine!
Well, after a few swear words, Rob got the head put back on, only to discover that the ehad wasnt the only problem i had with my engine! and suspected that my bottom end was in need of a rebuild!!!
So due to lack of funds, AND enthusiasm now, i went and picked clive up on Saturday on the back of a trailer and she is now sat in my garage, looking and feeling very sorry for herself!
Mark from M A Developments came out to have a gander under the bonnet for me yesterday, just to confirm what SCC had said, and that yes, i need a rebuild!
So after a total of approx 9grand and a huge total of 500 miles, i am right back to square one!!
So while i start saving my pennies, i am yet again cossieless!
i just thought id let you all in on the latest in the poorly cossie saga!
Oh and thanks again to everyone for putting up with me moaning, ranting and raving about clive!!!
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
After inspection at SCC it was discovered that my head had warped, hence needed replacing!!
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
![Mad](https://passionford.com/forum/images/smilies/mad.gif)
The top man Paul at North Yorks Spares sent over a new head to SCC so they could get it reattached to clives engine!
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Well, after a few swear words, Rob got the head put back on, only to discover that the ehad wasnt the only problem i had with my engine! and suspected that my bottom end was in need of a rebuild!!!
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
![Bat](https://passionford.com/forum/images/smilies/pascontent.gif)
So due to lack of funds, AND enthusiasm now, i went and picked clive up on Saturday on the back of a trailer and she is now sat in my garage, looking and feeling very sorry for herself!
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Mark from M A Developments came out to have a gander under the bonnet for me yesterday, just to confirm what SCC had said, and that yes, i need a rebuild!
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
So after a total of approx 9grand and a huge total of 500 miles, i am right back to square one!!
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
So while i start saving my pennies, i am yet again cossieless!
i just thought id let you all in on the latest in the poorly cossie saga!
Oh and thanks again to everyone for putting up with me moaning, ranting and raving about clive!!!
Trending Topics
#11
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Thread Starter
Join Date: Oct 2003
Location: All over the friggin place!!!
Posts: 18,685
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
the 9k wasnt just for the engine! lol that was for bufty bits, labour, the engine, and other odds n sods!!!
i think the thing that guts me the most is that shes just gonna sit there, and i can see her everyday in the garage, just cant do owt with ther!
i think the thing that guts me the most is that shes just gonna sit there, and i can see her everyday in the garage, just cant do owt with ther!
#18
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Thread Starter
Join Date: Oct 2003
Location: All over the friggin place!!!
Posts: 18,685
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
who in their right mind calls a female clive
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
well ive got 78p towards my 'fixing clive the cossie fund' now!
just a tad more to go....................................
#23
Advanced PassionFord User
Join Date: May 2003
Location: Barrow-in-Furness
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by CraigN
gonna be a lot in labour to fit etc
#25
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Thread Starter
Join Date: Oct 2003
Location: All over the friggin place!!!
Posts: 18,685
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
cheers for the huge huggy smiley thing ian! made me chuckle!
yeah i agree, but theres nowt i can do about it now! Ive had to put everything down to experience!! and yes i am fu(king fuming at the fact that i have no running car!!! but what can i do?? nothing! so i have to hold back the tears extremely hard, and look forward to having her back on the road in maybe a year or twos time!
9k is way to much. full stop, bufty bits dont come to 9k, and end of it u still have a car that aint running, id be fuming
#28
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Thread Starter
Join Date: Oct 2003
Location: All over the friggin place!!!
Posts: 18,685
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i bought the engine 2nd hand! and SCC fitted the engine for me as well as put some bufty bits etc etc on there as well swapping my management over blah blah blah
#30
It Wasnt Me!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Maria, if u dont wanna look at the cossie i'll happily put it outside my hous eand look after it (and tell me mates ive bought an Escort cossie)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#31
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Maria,
I know I no longer work there, but it would help when you post these sorts of things to let people know exactly what was done.
Since it seems that everybody knows exactly what was done for the money, would someone who obviously knows like to explain to everyone else?
This is what I hate about these bulletin boards - everybody is SOOO quick to jump on the bandwagon and act like vultures when they smell fresh prey.
Did it get mentioned that there's a clutch in there. Oh, and 18" tyres. Strut brace. Bailey tanks. Complete management swap including all sensors............... and the list goes on.
Fuckin clueless twats.
I know I no longer work there, but it would help when you post these sorts of things to let people know exactly what was done.
Since it seems that everybody knows exactly what was done for the money, would someone who obviously knows like to explain to everyone else?
This is what I hate about these bulletin boards - everybody is SOOO quick to jump on the bandwagon and act like vultures when they smell fresh prey.
Did it get mentioned that there's a clutch in there. Oh, and 18" tyres. Strut brace. Bailey tanks. Complete management swap including all sensors............... and the list goes on.
Fuckin clueless twats.
#34
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Thread Starter
Join Date: Oct 2003
Location: All over the friggin place!!!
Posts: 18,685
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Did it get mentioned that there's a clutch in there. Oh, and 18" tyres. Strut brace. Bailey tanks. Complete management swap including all sensors............... and the list goes on.
ok so whoops a fuckin daisy i forgot to mention 4 tyres and a clutch how god damn reckless of me!
#35
PassionFord Post Whore!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Join Date: Jun 2003
Location: *PF TERRORISTS CARTEL* Bin flocking Youngens :cry:
Posts: 6,814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
feel for ya girl
I only had my cossie a few months when it went bang. I was gutted and pissed off but not as much as I would be if I were in your situation.
hope the helps a bit
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
![](https://passionford.com/forum/images/smilies/bisou.gif)
![bearhug.gif](https://passionford.com/forum/images/smilies/bearhug.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#38
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Maria,
1. I'm not any high horse, so wind your neck in.
2. Stop insinuating things - you were entirely different to me on MSN this morning, so if you've got something to say...............
3. Why are you feeling the need to play trial by bulletin board. Unfortunately, I don't work at SCC anymore, and there's nothing I can do to help, but this is the second time I've been on two different bulletin boards to stop people jumping to conclusions about what was charged for the work carried out on your car, in a vein attempt to stop recrimination and the company being the victim of unfair criticism.
If any of these so-called experts had any idea on how the industry works, then they would realise that people charge different amounts for different reasons.
For example, Steve Scott charges an hourly labour rate that most companies couldn't even get close to, because he works with minimal overheads.
Now the job carried out on your was extremely labour intensive, hence the cost.
My problem was that it was being illustrated that it was 9k for an engine swap, which it clearly is not.
1. I'm not any high horse, so wind your neck in.
2. Stop insinuating things - you were entirely different to me on MSN this morning, so if you've got something to say...............
3. Why are you feeling the need to play trial by bulletin board. Unfortunately, I don't work at SCC anymore, and there's nothing I can do to help, but this is the second time I've been on two different bulletin boards to stop people jumping to conclusions about what was charged for the work carried out on your car, in a vein attempt to stop recrimination and the company being the victim of unfair criticism.
If any of these so-called experts had any idea on how the industry works, then they would realise that people charge different amounts for different reasons.
For example, Steve Scott charges an hourly labour rate that most companies couldn't even get close to, because he works with minimal overheads.
Now the job carried out on your was extremely labour intensive, hence the cost.
My problem was that it was being illustrated that it was 9k for an engine swap, which it clearly is not.
#39
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Thread Starter
Join Date: Oct 2003
Location: All over the friggin place!!!
Posts: 18,685
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
2. Stop insinuating things - you were entirely different to me on MSN this morning, so if you've got something to say...............
3. Why are you feeling the need to play trial by bulletin board. Unfortunately, I don't work at SCC anymore, and there's nothing I can do to help, but this is the second time I've been on two different bulletin boards to stop people jumping to conclusions about what was charged for the work carried out on your car, in a vein attempt to stop recrimination and the company being the victim of unfair criticism.
can ya find it? huh huh huh?
NO
if people wanna question what the money was spent on, then thats up to them! when i say something derogatory then you can shoot me down in flames, untill then, dont.
oh and ian, FANKOO
#40
Advanced PassionFord User
Join Date: May 2003
Location: Bristol / Solihull
Posts: 2,136
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
gutted for you maria
glad youre not giving up on clive though! she's a lovely car!
i can understand what youre gonig through, ive had similar luck with my cars but thankfully they are alot cheaper to fix than a cossie
big hug
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
i can understand what youre gonig through, ive had similar luck with my cars but thankfully they are alot cheaper to fix than a cossie
![Red Faced](https://passionford.com/forum/images/smilies/icon_redface.gif)
big hug
![](http://www.j-smith.org/smilies/page2/5.gif)