anyone put a 24v into a rwd sierra?
#41
DEYTUKURJERBS
No press? He got just as much as anyone else did
Never got any since as he hasnt competed in the UK since? Hes an Irish lad, still does stuff in Ireland, but whens the last time you heard anything about Irish stuff?
Its not pretty but its far from a standard P100 with a 24valver put in it...
Its Julian Smiths little brother Walton who drives it BTW
Never got any since as he hasnt competed in the UK since? Hes an Irish lad, still does stuff in Ireland, but whens the last time you heard anything about Irish stuff?
Its not pretty but its far from a standard P100 with a 24valver put in it...
Its Julian Smiths little brother Walton who drives it BTW
#45
Resident Wrestling Legend
iTrader: (3)
Originally Posted by cossiecrew
back to topic could i use a xr4x4 box then even though its 2wd ?
you need both front and rear props turning at the same sorts of speeds regardless of the vc actually working to get any drive forward
Originally Posted by cossiecrew
is the box thats in my 20i gt any use whatsoever? if i can use it what needs changing
that way you have a 2wd box with V6 bellhousing and input shaft
the rest is the same regardless
#47
Resident Wrestling Legend
iTrader: (3)
the 2.9 one
it's the mt75 so everything fits directly
from what i can rememebr, the 2.8 box (type 9) has an additional transfer box bolte donto the end so you might be able to just unbolt it and go from there, but them boxes tend to have a rep for shitting their pants at 24V power levels
it's the mt75 so everything fits directly
from what i can rememebr, the 2.8 box (type 9) has an additional transfer box bolte donto the end so you might be able to just unbolt it and go from there, but them boxes tend to have a rep for shitting their pants at 24V power levels
Thread
Thread Starter
Forum
Replies
Last Post
kyle_st200
Ford Focus Diesel
5
21-08-2015 09:28 PM