Big thankyou to Mark at MAD!!
20-04-2006, 01:31 PM
#1
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Big thankyou to Mark at MAD!!
Went to have my car setup by Mark yesterday and he’s done a great job!!
Unfortunately Mark diagnosed a loom fault which is causing high fluctuating temp readings from the water temp sensor and MAP readings are also effected. Plus the throttle position sensor is getting interference. New loom for me then
The good news is that I have talked a friend in to selling me his genuine Pectal loom for £100!! Hes removing it from his car before he sells it so that’s a result!!
"Look in to my eyes not around the eyes"
Anyway despite the faults I still managed to see off a new Audi S4 from 60-120 on the way home, not once but twice!! After the bash he pulled along side and we gave each other nods and he pulled off.
What a good sport
Anyway thanks Mark
Unfortunately Mark diagnosed a loom fault which is causing high fluctuating temp readings from the water temp sensor and MAP readings are also effected. Plus the throttle position sensor is getting interference. New loom for me then
The good news is that I have talked a friend in to selling me his genuine Pectal loom for £100!! Hes removing it from his car before he sells it so that’s a result!!
"Look in to my eyes not around the eyes"
Anyway despite the faults I still managed to see off a new Audi S4 from 60-120 on the way home, not once but twice!! After the bash he pulled along side and we gave each other nods and he pulled off.
What a good sportAnyway thanks Mark
20-04-2006, 03:17 PM
#6
Sounds like an enjoyable drive home then mate.
At least its just wiring problems and nothing serious that showed up, roll on the loom fitting then and get it back up there.
what power you looking for?
i just secured myself a mondeo 4 x 4 today for all the transmission
and picked up my new engine.
At least its just wiring problems and nothing serious that showed up, roll on the loom fitting then and get it back up there.
what power you looking for?
i just secured myself a mondeo 4 x 4 today for all the transmission
and picked up my new engine.
Trending Topics
20-04-2006, 06:57 PM
#13
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Yes was impressed with his work, he knows his stuff alright. Saw Rod's old block while I was there too 
Your right Dean it is Andy’s loom, he’s going to take it off this week for me, he’s a top chap You going Sunday?
I would be well happy with 330-350 Luke, it has all the right bits so with a little more boost im sure it would hit 350. So are you changing your car to 4x4 now?
Your right Dean it is Andy’s loom, he’s going to take it off this week for me, he’s a top chap
You going Sunday?I would be well happy with 330-350 Luke, it has all the right bits so with a little more boost im sure it would hit 350. So are you changing your car to 4x4 now?
Thread
Thread Starter
Forum
Replies
Last Post