my home made catch tank..
#1
PassionFord Post Troll
Thread Starter
Join Date: Jun 2003
Location: cumbria
Posts: 2,644
Likes: 0
Received 0 Likes
on
0 Posts
my home made catch tank..
hi all, this is the crap that was in my catch tank , i use the modified open loop breather system ..karl sent me a drawing when i bought my oil separater on what pipes should be blocked off and were it all goes with this system the cvh breathes so much better, all the oil you see in this pic..
is what normally ends up in the bottom of your metering head
but mine is now clean as a whistle
also all the breather pipes or bigger..
andy
is what normally ends up in the bottom of your metering head
but mine is now clean as a whistle
also all the breather pipes or bigger..
andy
#6
DEYTUKURJERBS
my catch tank on the S13 was made from a mountain bike water bottle, then a can of grolsche
this time i will just vent to floor i reckon.
some flash 1way valves tho, but that was jus cause i had em lying around.
this time i will just vent to floor i reckon.
some flash 1way valves tho, but that was jus cause i had em lying around.
Thread
Thread Starter
Forum
Replies
Last Post
PRO-LINE MOTORSPORT
General Car Related Discussion.
5
28-09-2015 09:54 PM