General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

Cometic Head Gaskets--Who has had problems with them

Thread Tools
 
Search this Thread
 
Old 22-07-2004, 03:35 PM
  #1  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default Cometic Head Gaskets--Who has had problems with them

As title

Old 22-07-2004, 03:38 PM
  #2  
zvhturbo
PassionFord Post Troll
 
zvhturbo's Avatar
 
Join Date: Apr 2004
Location: Kent
Posts: 2,865
Likes: 0
Received 0 Likes on 0 Posts
Default

I sent one back once as the bore holes didn't all line up.
Old 22-07-2004, 03:38 PM
  #3  
Deano
PassionFord Post Whore!!
 
Deano's Avatar
 
Join Date: May 2003
Posts: 6,657
Likes: 0
Received 0 Likes on 0 Posts
Default

Not me mate ,

Mine ran minimum of 36psi for a long time and even went as high as 42 without one bit of trouble

Id have one again anyday
Old 22-07-2004, 03:56 PM
  #4  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

hhhhhhhhhmmmmmmmmmmmmm
Old 22-07-2004, 03:57 PM
  #5  
Stu @ M Developments
PassionFords Creator



iTrader: (12)
 
Stu @ M Developments's Avatar
 
Join Date: May 2003
Location: Blackpool, UK Destination: Rev limiter
Posts: 28,824
Received 95 Likes on 76 Posts
Default

No problems at all and ive sold and fitted LOTS of them now!!
Old 22-07-2004, 03:57 PM
  #6  
Rene
PassionFord Post Whore!!
 
Rene's Avatar
 
Join Date: Jun 2003
Location: Holland
Posts: 7,442
Likes: 0
Received 0 Likes on 0 Posts
Default

u assume i got that one fitted ?
Old 22-07-2004, 03:59 PM
  #7  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

I must of had a shit one then
Old 22-07-2004, 04:01 PM
  #8  
Deano
PassionFord Post Whore!!
 
Deano's Avatar
 
Join Date: May 2003
Posts: 6,657
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TIFF-C20WTH
I must of had a shit one then
Also comes in 2 different thicknesses mate
Old 22-07-2004, 04:02 PM
  #9  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

dean

Yer mate, but the one i got had a fault within it
Old 22-07-2004, 04:04 PM
  #10  
Rhys
15K+ Super Poster!!
 
Rhys's Avatar
 
Join Date: May 2003
Location: South Wales, GB
Posts: 18,745
Likes: 0
Received 0 Likes on 0 Posts
Default

whats up with your one Tiff?
Old 22-07-2004, 04:06 PM
  #11  
Deano
PassionFord Post Whore!!
 
Deano's Avatar
 
Join Date: May 2003
Posts: 6,657
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TIFF-C20WTH
dean

Yer mate, but the one i got had a fault within it
Within it

Whats happened exactly ?
Old 22-07-2004, 04:06 PM
  #12  
zvhturbo
PassionFord Post Troll
 
zvhturbo's Avatar
 
Join Date: Apr 2004
Location: Kent
Posts: 2,865
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TIFF-C20WTH
I must of had a shit one then
Me 2.

Got the good old Felpro instead.
Old 22-07-2004, 04:09 PM
  #13  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Rhys
whats up with your one Tiff?
Basically it had a fault that could not be seen but once fitted it showed its ugly head and caused a bit of damage.

I will be getting in contact with Cometic direct
Old 22-07-2004, 04:09 PM
  #14  
cosworth3d
Too many posts.. I need a life!!
 
cosworth3d's Avatar
 
Join Date: May 2004
Location: Holland
Posts: 694
Received 3 Likes on 3 Posts
Default

mine's holding on ok
Old 22-07-2004, 04:10 PM
  #15  
Spiky
Professional Waffler
iTrader: (1)
 
Spiky's Avatar
 
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes on 0 Posts
Default

Old 22-07-2004, 04:11 PM
  #16  
Deano
PassionFord Post Whore!!
 
Deano's Avatar
 
Join Date: May 2003
Posts: 6,657
Likes: 0
Received 0 Likes on 0 Posts
Default

Why not sort it out with whoever supplied the gasket mate ?
Old 22-07-2004, 04:21 PM
  #17  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

Dean

It is not there problem as they only sell the gasket
Old 22-07-2004, 04:24 PM
  #18  
Deano
PassionFord Post Whore!!
 
Deano's Avatar
 
Join Date: May 2003
Posts: 6,657
Likes: 0
Received 0 Likes on 0 Posts
Default

But its still faulty mate , they sold it you let them sort it out with Cometic
Old 22-07-2004, 04:26 PM
  #19  
Rene
PassionFord Post Whore!!
 
Rene's Avatar
 
Join Date: Jun 2003
Location: Holland
Posts: 7,442
Likes: 0
Received 0 Likes on 0 Posts
Default

lotf of damage mate?
Old 22-07-2004, 04:52 PM
  #20  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Deano
But its still faulty mate , they sold it you let them sort it out with Cometic
Do you think it would be there problem then??????

Ie, They foot the bill of repair?
Old 22-07-2004, 04:54 PM
  #21  
Deano
PassionFord Post Whore!!
 
Deano's Avatar
 
Join Date: May 2003
Posts: 6,657
Likes: 0
Received 0 Likes on 0 Posts
Default

Tiff if theyve sold you a faulty gasket then of course between themselves and Cometic they would have to pay for the repairs
Old 22-07-2004, 04:57 PM
  #22  
Jim Galbally
20K+ Super Poster.
 
Jim Galbally's Avatar
 
Join Date: May 2003
Location: Ramsgate, Kent Drives: E39 530D Touring
Posts: 20,599
Likes: 0
Received 0 Likes on 0 Posts
Default

officially you should be getting recompensed by who supplied the gasket and then they claim off of cometic...
Old 22-07-2004, 04:59 PM
  #23  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

Ok Guys, Thanks for that, i will get onto them first thing
Old 22-07-2004, 05:09 PM
  #24  
Ima-Racing500
Advanced PassionFord User
 
Ima-Racing500's Avatar
 
Join Date: Apr 2004
Location: Kent
Posts: 2,115
Likes: 0
Received 0 Likes on 0 Posts
Default

I would be looking at the person who fitted it...i can only guess it was not put on correctly.

Who fitted it????Dont say Karl either as being a gasket designer he would have seen the fault immediately if there was one
Old 22-07-2004, 05:33 PM
  #25  
Deano
PassionFord Post Whore!!
 
Deano's Avatar
 
Join Date: May 2003
Posts: 6,657
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Jim Galbally
officially you should be getting recompensed by who supplied the gasket and then they claim off of cometic...
I could have swore thats what I said
Old 22-07-2004, 05:49 PM
  #26  
Shings
PassionFord Post Whore!!
 
Shings's Avatar
 
Join Date: May 2003
Location: .
Posts: 8,655
Likes: 0
Received 1 Like on 1 Post
Default

Tiff

Definatly supplier- in retail thats who the contract is made with. and the same when the retailer buys things from the manufacturer.

It should not be your responsibility to chase them- Dont be fobbed off...
If a garage owner chooses to sell car parts just because they're a garage as well doesn't mean they can tuck you up. They're still retailing.

J
Old 22-07-2004, 05:50 PM
  #27  
Matt
PassionFord Post Whore!!
 
Matt's Avatar
 
Join Date: May 2003
Location: Doncaster
Posts: 5,143
Likes: 0
Received 0 Likes on 0 Posts
Default

only person i know for sure has one is katie keith its a .57 (i think?) one if that makes any sense. has held only a week of 2 bar but you know he drives like a pleb 24/7 bless him lol

hope there aint too much damage anyway pal
Old 22-07-2004, 05:55 PM
  #28  
Damo V
PassionFord Post Whore!!
 
Damo V's Avatar
 
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes on 0 Posts
Default

sorry to hear that mate, without wishing to tempt fate, I got the thicker one, which is fine.... at the mo
Old 22-07-2004, 05:56 PM
  #29  
nomad
Too many posts.. I need a life!!
 
nomad's Avatar
 
Join Date: May 2003
Location: nottingham
Posts: 654
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Deano
Tiff if theyve sold you a faulty gasket then of course between themselves and Cometic they would have to pay for the repairs
how do you work that one out ?
you MAY find the gasket is warranted, if it fails they MAY replace the faulty item with a new one. NO ONE guarantees a head gasket , not even ford. cheers nomad
Old 22-07-2004, 06:03 PM
  #30  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

Nomad

The gasket was replaced with a Proper Mountune 4 layer WRC one and i paid the difference.
My problem is i have to sort out the damage that was caused because the gasket was faulty
Old 22-07-2004, 06:06 PM
  #31  
marco polo
10K+ Poster!!
iTrader: (1)
 
marco polo's Avatar
 
Join Date: May 2003
Location: birmingham
Posts: 10,644
Likes: 0
Received 5 Likes on 5 Posts
Default

Tiffany

i use to use the pukka 4 layer WRC version.... i tyred the cometics gasket and has been fine so far i have done loads of track days on it

it's fine it was 1/2 the price of the pukka wrc one i did ask deano about it sometime ago i went for the thicker 1 of the 2

you defo got a faulty one mate no douwt
Old 22-07-2004, 06:13 PM
  #32  
nomad
Too many posts.. I need a life!!
 
nomad's Avatar
 
Join Date: May 2003
Location: nottingham
Posts: 654
Likes: 0
Received 0 Likes on 0 Posts
Default

i know what you mean tiff, it would be best to try the softly softly approach first with supplier then with cometic to try and get recompense, what i am saying is that they might honour the warranty on the gasket (due to fault) but might not honour any repairs due to the failure, it will be entirely at their discression, i had a problem with a ford engine part failure and ford would not even let me open the engine, if i had taken the head off my warranty would have been void, hope you get a good outcome but its not all plainsailing. cheers nomad
Old 22-07-2004, 06:16 PM
  #33  
marco polo
10K+ Poster!!
iTrader: (1)
 
marco polo's Avatar
 
Join Date: May 2003
Location: birmingham
Posts: 10,644
Likes: 0
Received 5 Likes on 5 Posts
Default

Tiff

another thing while your on .........to use these or any metal gasket the block surface and the head surface has to be 100% flat or they will not work

marco
Old 22-07-2004, 06:17 PM
  #34  
POPEYE
FAIRY CAKE

 
POPEYE's Avatar
 
Join Date: May 2003
Location: THE BEACHES, AUSTRALIA
Posts: 15,206
Likes: 0
Received 0 Likes on 0 Posts
Default

i reckon the tuner might know that marco
Old 22-07-2004, 06:18 PM
  #35  
Ima-Racing500
Advanced PassionFord User
 
Ima-Racing500's Avatar
 
Join Date: Apr 2004
Location: Kent
Posts: 2,115
Likes: 0
Received 0 Likes on 0 Posts
Default

Its a bit like one of my injectors failing and fucking your engine,nothing i can do....and Bosch deffo would only replace the faulty part!!!!!!

Thats life
Old 22-07-2004, 06:19 PM
  #36  
DaveEscos
BANNED
BANNED
 
DaveEscos's Avatar
 
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes on 2 Posts
Default

what damage tiff?

water stains
Old 22-07-2004, 06:24 PM
  #37  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Ima-Racing500
Its a bit like one of my injectors failing and fucking your engine,nothing i can do....and Bosch deffo would only replace the faulty part!!!!!!

Thats life
Phil

But what if it was found that the injector itself was faulty which caused the engine to blow????????
Old 22-07-2004, 06:41 PM
  #38  
PhilM
PassionBMW.com Member
 
PhilM's Avatar
 
Join Date: May 2003
Location: UK
Posts: 3,530
Likes: 0
Received 0 Likes on 0 Posts
Default

Tiff, aint that what he said?

Hope it aint too bad tho
Old 22-07-2004, 06:44 PM
  #39  
marco polo
10K+ Poster!!
iTrader: (1)
 
marco polo's Avatar
 
Join Date: May 2003
Location: birmingham
Posts: 10,644
Likes: 0
Received 5 Likes on 5 Posts
Default

Originally Posted by popeye
i reckon the tuner might know that marco
off course so it's faulty gasket then .if thats the case then cometics have to sort it simple as that really

tiff get on the case
Old 22-07-2004, 06:48 PM
  #40  
TIFF
Chasing Radders

Thread Starter
 
TIFF's Avatar
 
Join Date: May 2003
Location: WARWICK
Posts: 37,253
Likes: 0
Received 2 Likes on 2 Posts
Default

Marco

First thing in the morning


Quick Reply: Cometic Head Gaskets--Who has had problems with them



All times are GMT. The time now is 03:15 AM.