Thanasis

iTrader: (3)

Hi to all,i fitted new diff in my 2wd 7.5" case,here some pics to see what need to fit it,the results are awesome,without any noises and better wheels locking!


hébergeur images

hebergeur image

herbergeur d image

hebergement image

hébergement gratuit

hebergeur gratuit

photo libre

téléchargement de photos

hébergement gratuit d'images

des photos

Toe Knee

iTrader: (2)

How much for it all?!!

Thanasis

iTrader: (3)

500euros for the diff,80euros lathe job,35euros side shaft drive seals,22euros the bearings,20euros ford gear oil,all the rest from me!

Marc sierra

iTrader: (1)

That's nice! I have been looking at those diffs as well. I would have expected the Eaton would be noisy on tight corners. Doesn't it make any noise at all? They also do a helical diff, like the Quaife, but for a much better price.

Thanasis

iTrader: (3)

I don't have test the car on tight corners yet just straight road with 250 kilometers with no noise

Marc sierra

iTrader: (1)

On a straight road it will never be noisy, as both shafts turn with the same speed. But when the speeds of the shafts differ (which is maximum on tight corners) the plates can become noisy. I'm interested to hear how bad the noise is.

Thanasis

iTrader: (3)

As i know the gripper type have noise,do you have learn about this eaton diff any info about that?

you can read some details here:

http://www.mc2racing.com/products/xr...619/index.html

Toe Knee

iTrader: (2)

Ah so the casing needs machining?! Not just a buy and fit then?!!

Thanasis

iTrader: (3)

Yes need little machining in the left side as in the pic,and drive shafts studs also!