hi all ,

so I have changed the complete wiring loom on the p100 with a sierra cosworth one so it all fits the way it should and just to make the change over a bit easier , however I have got problems with it ,

I only have a right hand side side light , no head light or full beam

no side light , head light or full beam on the left side

I do have the indicator's working on both sides and the back lights

on the rear lights I have no stop/tail or fog

there doesn't seem to be any power to the connector at the front or the rear .

all fuses are ok , I have changed over relays and still no joy , all earths are on that I can see

the switches on the steering stock I am guessing are fine as they worked with no problems before

so anyone with any ideas would be great as its doing my head in

Thanks

 

If stalks,relays and fuses are ok and you have good earth i would say check the loom for damage

 

yea I was thinking that , I will try the stock switch first , there is a part that's been joined by someone on the passengers side but don't know if to cut it out and make a new join , not the easiest to get to now with the rad and coolers in place if need be I will strip it out again

 

sidelight can be wired in from the other working 1, but investigate the dodgy wire first

main lights could be relay prob

 

thanks for the help so far , will get into the head ache tomorrow