Expected power On MSD Chip
#1
Expected power On MSD Chip
Right here goes
currentley running a T3 on 803 greens 500 intercooler oil breather kit moongoose exhaust and a k&n cone filter all controlled by an MSD 320 BHP CHIP.
Power figure is 319bhp and 357lbt.
Now Im looking to fit a T34.63 which has the 360 bearings and so on just been rebuilt,bosch 400 light blue injectors and a WRC headgasket.
The question is do i run a 340 bhp chip to be on the safe side or go for the 380bhp chip?
car in question is a 4x4 saph that has done 66k but the engine is in good order?
Thanks in advance
currentley running a T3 on 803 greens 500 intercooler oil breather kit moongoose exhaust and a k&n cone filter all controlled by an MSD 320 BHP CHIP.
Power figure is 319bhp and 357lbt.
Now Im looking to fit a T34.63 which has the 360 bearings and so on just been rebuilt,bosch 400 light blue injectors and a WRC headgasket.
The question is do i run a 340 bhp chip to be on the safe side or go for the 380bhp chip?
car in question is a 4x4 saph that has done 66k but the engine is in good order?
Thanks in advance
#4
Advanced PassionFord User
Right here goes
currentley running a T3 on 803 greens 500 intercooler oil breather kit moongoose exhaust and a k&n cone filter all controlled by an MSD 320 BHP CHIP.
Power figure is 319bhp and 357lbt.
Now Im looking to fit a T34.63 which has the 360 bearings and so on just been rebuilt,bosch 400 light blue injectors and a WRC headgasket.
The question is do i run a 340 bhp chip to be on the safe side or go for the 380bhp chip?
car in question is a 4x4 saph that has done 66k but the engine is in good order?
Thanks in advance
currentley running a T3 on 803 greens 500 intercooler oil breather kit moongoose exhaust and a k&n cone filter all controlled by an MSD 320 BHP CHIP.
Power figure is 319bhp and 357lbt.
Now Im looking to fit a T34.63 which has the 360 bearings and so on just been rebuilt,bosch 400 light blue injectors and a WRC headgasket.
The question is do i run a 340 bhp chip to be on the safe side or go for the 380bhp chip?
car in question is a 4x4 saph that has done 66k but the engine is in good order?
Thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
wheelwizardrefurbs
Technical help Q & A
8
18-09-2015 08:59 PM